淺析電子駐車技術的應用(編輯修改稿)
2025-08-10 00:46 本頁面
【文章內容簡介】 的傳遞機構，把力由電機齒輪的轉動轉化成拉線方向上力。其齒輪結構的工作原理如右圖電機帶動拉線所在的外齒輪機構和內齒輪機構旋轉，因?yàn)樾D(zhuǎn)方向相反，帶動連接在內外齒輪機構的拉線運動，實現駐車。 gear mechanism. Different manufacturers EPB work principle of this part of the mechanism is not necessarily the same but the effect is the same. Is a force transmission mechanism, the force by the rotation of the motor gear into pull direction force. The working principle of gear structure such as the right motor drives the pull of outer gear mechanism and inner gears rotate, for rotating in the opposite direction, drive the cord attached to the inside and outside gear mechanism movement, parking. 。ECU用來控制EPB對外的信息交流和反饋。傳感器用來感應拉力的大小。 ECU and the sensors. ECU is used to control EPB foreign exchange of information and feedback. The size of the sensor to sense tension. 4 EPB總成的工作原理和其功能的實現原理4 EPB work principle and the realization of the function of the principle of assembly 。拉線式EPB工作原理為：通過開關給ECU一個通斷信號，EPB的ECU控制電機進行旋轉，然后由內部的齒輪機構把此力輸出到拉線上，由拉線帶動制動器進行駐車。 EPB assembly works. Guyed EPB work principle is: through the switch to ECU an onoff signal, EPB ECU to control motor rotation, and the internal gear mechanism to put the power output to the guy, the guy drive the parking brake. EPB principle of realization of each function （1）基本功能。最基本的功能，靜態釋放和靜態駐車功能，通過按鈕駐車和解除駐車此工作原理簡單，也就是上面的EPB工作原理。(1) basic function. And the static and the most basic function, the static release parking function, through the button in the car and lifted parking the principle is simple, also is the working principle of the EPB. ?。?）EPB賣點之一的動態功能。當車在行車狀態，速度大于12km/h,若按下EPB按鈕，ECU指揮馬達帶動拉線駐車，當車輪要抱死，有滑移的傾向時，ECU通過CAN得到這個信號后，會使拉線力減小，以便不使車輪抱死，如此循環，直至車停下為止。雖然EPB有此功能，但各個EPB廠家，并不推薦客戶把EPB當作行車制動器使用，并且還明確要求客戶，此功能只能在常規制動器失效或不可使用踏板的緊急情況下才能使用，這是因?yàn)樵谛熊囍?，駐車制動器啟動后，那么就把制動力全部加在后輪，對后制動器的損害是很大的。(2) EPB one selling point of dynamic capabilities. State when the car in drive, speed is greater than 12 km/h, if the EPB button, motor drive the guy39。s car ECU mand, when the wheels to lock, have a tendency to slip when the ECU by CAN get the signal, CAN make the pull force is reduced, so as not to make the wheel lock, so circulates, until stopped. The EPB has this function, but each EPB manufacturer, don39。t remend customer to EPB as vehicle brake is used, and customer also made clear requirements, this functionality can only be used in conventional brake failure or peda
化學相關推薦
鄂ICP備17016276號-1