壓鑄模具管理和保養規范方案中英文版(編輯修改稿)
2025-05-23 05:48 本頁面
【文章內容簡介】 nning smoothly, no breakage and no jammed.，型腔、型芯不允許有碰傷現象和粘有異物；分型面、排氣槽不允許有鋁（銅或鋅）渣和污物，如有必須清理干凈。Carefully check the diecasting mold cavity and the subsurface, cavity, core has no foreign body, dented。 parting surfaces, exhaust vents have no aluminum (copper or zinc) residue and dirt.，聯接必須牢固，頂桿推板上拉桿孔螺紋必須完好。Check the casting mold ejector push plate and ejector fixed plate, ensure ejector push rod hole threads are intact.，吊環螺釘與壓鑄模聯接必須牢固。Check the casting mold screw rings, ensure no cracks, screw rings and diecasting mold must be secure.,插芯到位。Die casting mold should ensure that the reset lever is flush with the parting line and the inserts in place.：Die Casting Maintenance壓鑄模的保養分為日常保養與周期性保養Casting mold maintenance is divided into routine maintenance and periodic maintenance.日常保養主要將模具外表面鋁渣及污垢清理干凈。Routine maintenance is mainly clean the outer surface of the mold and aluminum dirt residue.周期性保養要求如下：Periodic maintenance requirements ar
規章制度相關推薦
鄂ICP備17016276號-1