[計算機(jī)]普通表客戶按鍵說明en(編輯修改稿)
2025-04-19 13:20 本頁面
【文章內(nèi)容簡介】 ↙” enter into it and decide whether you want to save or not. Select “YES” to save or “NO” not save and press “↙” again to affirm. The system will return to normal display status at the same time. Notice: Key “SET” has the function of cycling enter into setting operation. If you set the parameter and exit without enter into function to save all the operations. All the data set just now will be gave up. minute after enter into key set system and without any operations the meter will return to normal display status automatically. Special illuminate: The display scale of the meter has a little changed to enhance the patible capability in integer change and special change situation. Clients needn’t set changes to adjust the display scale. You just need to confirm the input range then enter into function “” and set the display data corresponding to the primal value.( Default normal value is voltage:100V,current 5A.) For example: There is a voltage meter 10KV/100V. If you want to display two decimal, set “” value into “1000”. And if you just need one decimal, then please set it to “100”. Another case is Voltage meter 380V/100V. If you want to display one decimal, set “” val
環(huán)評公示相關(guān)推薦
鄂ICP備17016276號-1