【文章內容簡介】 ,0xAB,0xAA,0xAA,0xAA,0x02,0x02,0x00,0x00,0x00,0x07,0x04,0x04,0x04,0x04,0x04,0x07,0x00,0x00,0x00},{0x82,0x82,0x92,0xFA,0x96,0x93,0x92,0xF6,0x9A,0xB2,0x82,0x00,0x04,0x04,0x02,0x01,0x00,0x00,0x00,0x07,0x00,0x00,0x00,0x00},{0x00,0x1C,0x7E,0x7E,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},//自動控制升降旗系統{0x00,0x00,0xFE,0x92,0x92,0x93,0x92,0x92,0x92,0xFE,0x00,0x00,0x00,0x00,0x07,0x04,0x04,0x04,0x04,0x04,0x04,0x07,0x00,0x00},{0x92,0x52,0x32,0x52,0x92,0x10,0x08,0xFF,0x08,0x08,0xF8,0x00,0x03,0x01,0x01,0x01,0x05,0x02,0x01,0x04,0x04,0x06,0x01,0x00},{0x44,0x24,0xFF,0x14,0x26,0x52,0x4A,0xC3,0x4A,0x52,0x26,0x00,0x04,0x04,0x07,0x00,0x04,0x04,0x04,0x07,0x04,0x04,0x04,0x00},{0x18,0xD6,0x54,0xFF,0x54,0x56,0xD4,0x00,0xFC,0x00,0xFF,0x00,0x00,0x03,0x00,0x07,0x00,0x02,0x03,0x00,0x04,0x04,0x07,0x00},{0x22,0x22,0x22,0xFE,0x21,0x21,0x20,0xFF,0x20,0x20,0x20,0x00,0x04,0x04,0x02,0x01,0x00,0x00,0x00,0x07,0x00,0x00,0x00,0x00},{0xFF,0x81,0x99,0xE7,0x28,0xD4,0x57,0xE9,0x55,0x53,0x10,0x00,0x07,0x00,0x00,0x00,0x01,0x01,0x01,0x07,0x01,0x01,0x01,0x00},{0x04,0xFD,0x16,0xF4,0x04,0x12,0xFB,0x52,0x52,0xFA,0x12,0x00,0x06,0x01,0x04,0x07,0x01,0x05,0x03,0x01,0x01,0x03,0x05,0x00},{0x00,0x02,0x4A,0xCA,0x6E,0xDA,0x49,0xC9,0x65,0x41,0x00,0x00,0x04,0x02,0x01,0x04,0x04,0x07,0x00,0x00,0x01,0x02,0x04,0x00},{0x48,0x6C,0x5B,0x4C,0x00,0x32,0xEA,0x27,0xE2,0x32,0x22,0x00,0x02,0x02,0x01,0x05,0x04,0x02,0x01,0x00,0x07,0x04,0x07,0x00},//手動{0x42,0x4A,0x4A,0x4A,0x4A,0xFE,0x49,0x49,0x49,0x49,0x40,0x00,0x00,0x00,0x00,0x04,0x04,0x07,0x00,0x00,0x00,0x00,0x00,0x00},{0x92,0x52,0x32,0x52,0x92,0x10,0x08,0xFF,0x08,0x08,0xF8,0x00,0x03,0x01,0x01,0x01,0x05,0x02,0x01,0x04,0x04,0x06,0x01,0x00}, }。const unsigned char NUM_LCD[17]={ 0xaf,0xa0,0x6d,0xe9,0xe2,0xcb,0xcf,0xa1,0xef,0xeb,0xe7,0xca,0x0f,0xec,0x4f,0x47,0x00}。 // 39。F39。,39。全熄39。unsigned char lcd_Buf[LCD_IN_USE]。 // 自定義顯示緩沖區，用于要顯示的數據/******************************************************** LCD模塊初始化*******************************************************/void init_LCD(void){ char tmpv。 BTCTL = BT_fLCD_DIV32。 // set LCD 時鐘 P5SEL = 0xfc。 // 置為外圍模塊LCDCTL = LCDON+LCD4MUX+LCDP1。 // 4Mux 模式define LCDSG0_1 (LCDP0) /* S0 S15 see Datasheet *///define LCDSG0_2 (LCDP1) /* S0 S19 see Datasheet */ for (tmpv = 0。tmpv6。tmpv++) { LCDMEM[tmpv] = 0x00。 //clear LCD }}/******************************************************** LCD清零模塊*******************************************************/void cl_LCD(void){ char tmpv。 for (tmpv = 0。tmpv6。tmpv++) //改為6 { LCDMEM[tmpv] = 0x00。 //clear LCD }}/***************************************************** 更新LCD緩沖區的內容，把數據顯示到LCD****************************************************/void lcd_Display(void){ unsigned int m1。 char tmpv。 if(m=99) { lcd_Buf[0]=16。 lcd_Buf[1]=m/10。 lcd_Buf[2]=m%10。} else {m1=m100。 lcd_Buf[0]=1。 lcd_Buf[1]=m1/10。 lcd_Buf[2]=m1%10。} lcd_Buf[3]=16。 lcd_Buf[4]=16。 lcd_Buf[5]=16。 for(tmpv=0。tmpvLCD_IN_USE。tmpv++) { LCDMEM[tmpv] = NUM_LCD[lcd_Buf[tmpv]]。 //更新LCDMEM中的內容 } //如何區分秒、分、時，利用小數點？LCDMEM[1]或0x10。// LCDMEM[3]或0x10。}void LCD_init(void)。void LCD_clear(void)。void LCD_write_english_string(unsigned char X,unsigned char Y,char *s)。void LCD_write_chinese_string(unsigned char X, unsigned char Y, unsigned char ch_with,unsigned char num, unsigned char line,unsigned char row)。void LCD_write_char(unsigned char c)。void LCD_write_byte(unsigned char dat, unsigned char dc)。void delay_1us(void)。 void delay_1us(void) //1us延時函數{ unsigned int i。 for(i=0。i100。i++)。 } void delay_1ms(void) //1ms延時函數 { unsigned int i。 for (i=0。i1140。i++)。 } void delay_nms(unsigned int n) //N ms延時函數 { unsigned int i=0。 for (i=0。in。i++) delay_1ms()。 }void LCD_init(void) { // 產生一個讓LCD復位的低電平脈沖 // LCD_RST = 0。 LCD_5110_DIR |= 0x1f。 LCD_5110_OUT amp。=0x0f。 delay_1us()。 // LCD_RST = 1。 LCD_5110_OUT |= 0x10。 // 關閉LCD //LCD_CE = 0。 LCD_5110_OUT amp。= 0x17。 delay_1us()。 // 使能LCD //LCD_CE = 1。 LCD_5110_OUT |= 0x08。 delay_1us()。 LCD_write_byte(0x21, 0)。 // 使用擴展命令設置LCD模式 LCD_write_byte(0xc8, 0)。 // 設置偏置電壓 LCD_write_byte(0x06, 0)。 // 溫度校正 LCD_write_byte(0x13, 0)。 // 1:48 LCD_write_byte(0x20, 0)。 // 使用基本命令 LCD_clear()。 // 清屏 LCD_write_byte(0x0c, 0)。 // 設定顯示模式，正常顯示 // 關閉LCD LCD_5110_OUT amp。= 0x17。 }/*LCD_clear : LCD清屏函數*/void LCD_clear(void) { unsigned int i。 LCD_write_byte(0x0c, 0)。 LCD_write_byte(0x80, 0)。 for (i=0。 i504。 i++) LCD_write_byte(0, 1)。 }/*LCD_set_XY : 設置LCD坐標函數輸入?yún)?shù)：X ：0－83 Y ：0－5*/void LCD_set_XY(unsigned char X, unsigned char Y) { LCD_write_byte(0x40 | Y, 0)。 // column LCD_write_byte(0x80 | X, 0)。 // row }/*LCD_write_char : 顯示英文字符輸入?yún)?shù)：c ：顯示的字符；*/void LCD_write_char(unsigned char c) { unsigned char line。 c = 32。