【文章內(nèi)容簡介】 fying Laminate 1 Double click on the Laminate attribute or the 3D Zone Identifier to modify 4 Select the new material 6 Click OK for validation 2 Select the material to modify with the third button of the mouse 3 Click the Change Material option 5 Modify the Laminate Copyright DASSAULT SYSTEMES 35 Transition Zones You will bee familiar with creating a Transition Zone Defining Transition Zone Modifying Transition Zone Refining Transition Zone Copyright DASSAULT SYSTEMES 36 Defining Transition Zone 3 Select the curves which define the Transition Zone contour: Respect a logical order, (1 to 4) or (4 to 1) 4 Click OK for validation 1 2 3 4 1 Click the Transition Zone icon 2 Select the Underlying Zone Copyright DASSAULT SYSTEMES 37 Modifying Transition Zone 1 Double click on the Transition Zone attribute or the 3D identifier to modify 4 Click OK for validation 2 Select the new Underlying Zone 3 Select the curves to remove and the new curves Copyright DASSAULT SYSTEMES 38 Refining a Taper 1 Double click on the Transition Zone attribute or the 3D identifier to modify 6 – Press OK to store these parameters 3a Select the Refinement Number option 4a – Key in the number of intermediate curves to be created 5a – Press the Visualize button to see the Refinement curves 3b Select the Curve Selection option 4b – Multiselect userdefined intermediate curves 2 Select the Taper Refinement option OR Plies Copyright DASSAULT SYSTEMES 39 Connection Generator You will bee familiar with the Connection Generator option Analyzing Structural Zones Analyzing Transition Zones Storing/Checking Connection Generator Results Copyright DASSAULT SYSTEMES 40 Analyzing Structural Zones 4 Click Apply for visualization 3 Select the both Structural Zones options Number of plies at the upper zone Name of the both zones (Zx,Zy) Curves : Red color : (Zone,Zone) Yellow color : (external Zone contour) 1 Click the Connection Generator icon 2 Select the Zones Group Copyright DASSAULT SYSTEMES 41 Analyzing Transition Zones 7 Click Apply for visualization 6 Select the both Transition Zones options Number of plies at the upper zone Curves : Cyan color : (Taper,Taper) Magenta color : (Zone,Taper) Green color : (Taper) top curve Bleu color : low curve of a taper Name of the different elements (Zones。Tapers) 5 Select the Zones Group Copyright DASSAULT SYSTEMES 42 Storing the Connection Generator Feature 1 Click on the OK button Copyright DASSAULT SYSTEMES 43 Updating the Connection Generator Feature 1 Edit the Connection Generator Feature in the tree 2 Click the Apply button to see the updated results 3 Check the design changes 4 Click the OK button to store the updated results Copyright DASSAULT SYSTEMES 44 Imposed Thickness Point (ITP) You will bee familiar with creating ITP Defining an ITP Modifying an ITP number of plies is defined (by the adjacent zones) number of plies is undefined ITP definition needed Z1 Z2 T1 Z1 Z2 T1 T2 or Copyright DASSAULT SYSTEMES 45 Defining ITP 3 Select a point 4 Indicate the number of plies at the selected point 5 Click OK for validation 1 Click the ITP icon 2 Select the Zones Group Copyright DASSAULT SYSTEMES 46 Modifying ITP 2 Change the value 3 Click OK for validation 1 Double click on the ITP attribute or onto the 3D ITP Copyright DASSAULT SYSTEMES 47 Stackup file from Zones You will bee familiar with the Stackup file from Zones option Creating an Excel StackUp File Zone Connections option Modifying a StackUp File Copyright DASSAULT SYSTEMES 48 Creating an Excel StackUp File 5 Click OK for creation 1 Click the Stack Up File From Zones icon 3 Rename the File 4 Click Open for File name confirmation 2 Select the File address Copyright DASSAULT SYSTEMES 49 “Zones Connections” Option This matrix provides : the total surface of a zone, the total Length of Free edges of a zone (Zx/Zx) the total Length of Connection between 2 adjacent zones (Zx/Zy) Copyright DASSAULT SYSTEMES 50 Modifying a Stackup File (1/5) Switch Lines 1 Open the excel StackUp File 2 Cut the elements to move 3 Insert the cutting elements to reorder the laminate 4 Save: new File name if necessary Copyright DASSAULT SYSTEMES 51 Modifying a Stackup File (2/5) Rename sequences/plies Copyright DASSAULT SYSTEMES 52 Modifying a Stackup File (3/5) Geometrical level Theorical Stacking with the plies representation Switch line in Stacking with the plies representation Geometrical Level Modification in Stacking with Plies representation Plies visualization Plies visualization Plies visualization Copyright DASSAULT SYSTEMES 53 Modifying a Stackup File (4/5) Change logical zones binations Will require Plies creation from Zones with Staggering value Copyright DASSAULT SYSTEMES 54 Manually Modifying a Stackup File (5/5) 2 Modify the Stackup file: Order, new plies, material, direction 3 Create an Import Laminate file from the Modified Stackup file 4 Update the zones with the Import