【正文】 料尾和邊余料），或利用廢料作小零件等。(2).鍛造:改善內部組織,并鍛成所需要大形狀。毛坯上還要留出裝夾部位。作者在設計過程當中，得到同窗好友的支持以及在AutoCAD2004軟件應用、參考資料提供等方面的具體性指導和幫助，在此作者向他們表示深深的謝意。湖南科學技術出版社《沖壓技術數據手冊》北京此副模具整體設計合理規范、工作過程可行有效、成本適度適合大批量的生產和現有設備的使用。:凸模的準備工序,可根據凸模的結構特點,參考凹模的準備工序,將其中不需要的工序去掉即可。 凹模厚度 H=kb==凹模H取50mm凹模壁厚C取32mm凹模長度L取618mm凹模輪廓尺寸為61850mm 落料凹模⑴. 定位方式的選擇因?yàn)樵撃＞卟捎玫氖菞l料，控制條料的送進方向采用導料板，無側壓裝置，控制條料的送進步距采用機械自動控制，因?yàn)闂l料長度有一定的余量，可以靠操作工目測來設定⑵.卸料、出件方式的選擇因?yàn)楣ぜ虾駷?mm相對較薄，卸料力也較小，所以采用下出件比較便于操作與提高生產率。一個步距內的材料利用率可用下式表示模具制造、安裝稍復雜。11 凸凹模的結構設計7 提高材料利用率的方法s mold industry to provide good conditions and opportunities. For stamping, the singlestation single die structure, low productivity, and sheet metal parts can not be too plicated, or need more singlestation dies vice can be achieved. If the use of progressive die stamping production, you can change these shortings. Multiposition progressive die progressive die in general developed on the basis of a high precision, high efficiency, long life of the mold, the mold is an important representative of technologyintensive, is one of the development die. The punching die blanking addition to the work, but also the characteristics of part structure based on the nature and shape, plete beading, punching hole, bending, deep drawing forming process can even be pleted in the mold assembly process. Stamping, it will be with the material or strip materials sent from the mold after the entrance, step in the strictly controlled conditions, accuracy, forming process in accordance with the order arranged by the continuous pressing of the station, at the last station, or by punching cut off, the system can be washed to meet the requirements of stamping products. To ensure multiposition progressive die work, die must have a highprecisionoriented and accurate fixed pitch system, equipped with automatic feeding, automatic parts, safety testing and other devices is characterized by progressive die for high production efficie