【正文】 *******************************************************************************Automatic configuration is running, press CTRL_D to break or press CTRL_B to switch back to the default MDC.Device systemview配置mdca在主控板16和17上的磁盤使用上限均為20%。[Sysname] interface vlaninterface 4091[SysnameVlaninterface4091] mad bfd enable[SysnameVlaninterface4091] mad ip address 30 member 1[SysnameVlaninterface4091] mad ip address 30 member 2[SysnameVlaninterface4091] quit IRF merge occurs and the IRF system needs a reboot.開啟TenGigabitEthernet2/1/0/24端口。將設備的運行模式切換到IRF模式。創建IRF端口1/2，并將它與物理端口TenGigabitEthernet1/0/0/24和TenGigabitEthernet1/1/0/24綁定。配置S12510機框一設置S12510機框一的成員編號為1。[Sysname] irfport 1/2[Sysnameirfport1/2] port group interface TenGigabitEthernet 1/0/0/24[Sysnameirfport1/2] port group interface TenGigabitEthernet 1/1/0/24[Sysnameirfport1/2] quit[Sysname] chassis convert mode irfThe device will switch to IRF mode and reboot. You are remended to save the current running configuration and specify the configuration file for the next startup. Continue? [Y/N]:y[Sysname] interface TenGigabitEthernet2/1/0/24[SysnameTenGigabitEthernet2/1/0/24] undo shutdown[SysnameTenGigabitEthernet2/1/0/24] quit因為BFD MAD和生成樹功能互斥，所以在TenGigabitEthernet1/0/0/20和TenGigabitEthernet2/0/0/20上關閉生成樹協議。[Devicemdc2mdca] limitresource disk chassis 1 slot 16 ratio 20[Devicemdc2mdca] limitresource disk chassis 1 slot 17 ratio 20[Devicemdc2mdca] limitresource disk chassis 2 slot 16 ratio 20[Devicemdc2mdca] limitresource disk chassis 2 slot 17 ratio 20將虛擬交換機a的名稱修改為MDCA，以便和其它MDC區別。 配置Device A 定義類test，匹配方式為或操作，匹配規則為：匹配用戶網絡VLAN ID值為510和15的報文。為mdca分配接口TenGigabitEthernet1/2/0/1～TenGigabitEthernet1/2/0/48，以及接口TenGigabitEthernet2/2/0/1～TenGigabitEthernet2/2/0/48[Devicemdc2mdca] allocate interface tengigabitethernet 1/2/0/1 to tengigabitethernet 1/2/0/48The configurations of the interfaces will be lost. Continue? [Y/N]:y[Devicemdc2mdca] allocate interface tengigabitethernet 2/2/0/1 to tengigabitethernet 2/2/0/48創建VLAN接口3，并配置MAD IP地址。 9 09:04:48:279 2013 STM/4/STM_MERGE_NEED_REBOOT: MDC=1。[Sysname] interface TenGigabitEthernet2/0/0/24[SysnameTenGigabitEthernet2/0/0/24] undo shutdown[SysnameTenGigabitEthernet2/0/0/24] q