【正文】 uitInfo: Member ID change will take effect after the member reboots and operates in IRF mode.[Sysname] interface TenGigabitEthernet1/1/0/24[SysnameTenGigabitEthernet1/1/0/24] shutdown[SysnameTenGigabitEthernet1/1/0/24] quitSysname systemview[Sysname] irf member 1開啟TenGigabitEthernet1/0/0/24端口。Do you want to convert the content of the next startup configuration file flash:/ to make it available in IRF mode? [Y/N]:y將當前配置保存到下次啟動配置文件。%Jul[Sysname] interface TenGigabitEthernet 1/0/0/20[SysnameTenGigabitEthernet1/0/0/20] undo stp enable[SysnameTenGigabitEthernet1/0/0/20] quit[Sysname] interface TenGigabitEthernet 2/0/0/20[SysnameTenGigabitEthernet2/0/0/20] undo stp enable[SysnameTenGigabitEthernet2/0/0/20] quit啟動虛擬交換機a。[Device] sysname MDCADeviceA systemview[DeviceA] traffic classifier test operator or[DeviceAclassifiertest] ifmatch customervlanid 5 to 10[DeviceAclassifiertest] ifmatch customervlanid 15[DeviceAclassifiertest] quit 創建流行為test，并配置如下動作：添加VLAN ID為20的外層VLAN Tag。[Devicemdc2mdca] mdc Admin[Devicemdc1Admin] undo location chassis 1 slot 2The configuration associated with the specified slot of MDC will be lost. Continue? [Y/N]:y[Devicemdc1Admin] undo location chassis 2 slot 2The configuration associated with the specified slot of MDC will be lost. Continue? [Y/N]:y[Devicemdc1Admin] mdc mdca[Devicemdc2mdca] location chassis 1 slot 2[Devicemdc2mdca] location chassis 2 slot 2Sysname systemview[Sysname] vlan 4091[Sysnamevlan4091] port TenGigabitEthernet 1/0/0/20 TenGigabitEthernet 2/0/0/20[Sysnamevlan4091] quit[Sysname] irfportconfiguration active%Jul開啟TenGigabitEthernet2/0/0/24端口。Sysname systemview[Sysname] irf member 2關閉TenGigabitEthernet1/1/0/24端口。Info: Member ID change will take effect after the member reboots and operates in IRF mode.[Sysname] interface TenGigabitEthernet1/0/0/24[SysnameTenGigabitEthernet1/0/0/24] undo shutdown[SysnameTenGigabitEthernet1/0/0/24] quitPlease wait...[Sysname] quitSysname save(3) 9 14:03:06:855 2013 STM/5/STM_MERGE: MDC=1。將機框一的TenG1/0/0/20和機框二的TenG2/0/0/20進行物理連線。[Devicemdc2mdca] mdc startIt will take some time to start MDC...This MDC was started successfully.[Devicemdc2mdca] q