受檢醫院應提交的資料(完整版)
【正文】 八、《醫院感染管理辦法》九、《醫院管理評價指南（試行）》十、《醫師外出會診管理暫行規定》十一、《病歷書寫基本規范（試行）》十二、《處方管理辦法》十三、《湖北省醫院管理評審辦法》十四、《關于加強醫療機構臨床用血管理的通知》（鄂衛函〔2005〕476 號內容總結
（1）附件1
醫院管理評審標準分值分配表
附件2
各組分工及檢查內容
備注
計分方法：評分時，除臨床重點?？平ㄔO(shè)項目可加分外，其他的項目均不加分也不倒扣分
（2）附件1
醫院管理評審標準分值分配表
附件2
各組分工及檢查內容
備注
計分方法：評分時，除臨床重點專科建設項目可加分外，其他的項目均不加分也不倒扣分
為進一步強化公司安全生產、文明施工管理，切實落實安全生產責任，防止重大安全事故發生，保障企業和員工的生命和財產安全manufacturers drawings bolt fastened in the cylinder and outer cylinder. Cylinder cylinder in the drain pipe installation and measuring ponent leads. blade carrier, partitions and lower installation check the sealing ring of the seal and springs, which shall conform to the technical requirements manufacturers drawings. Cylinder gasket on the mounting brackets supporting the Group assembled, the lugs shall be no Burr on the surface, and other debris. Department suite in place to measure surface and inner cylinder surface height difference, pared with the original values confirm the location. lower bearing and thrust bearing installation clean bearing and bearing, thrust bearing joints, clean them with a thin layer of turbine oil, and then lifting it to bits. high and middle pressure cylinder over it to the end (for high pressure rotor and low pressure change flange gasket without connection unit) rotors and rotor flange gasket connection and there is no connection, so the rotor in place cases, rotors in place must be high and middle pressure cylinder together with the Chamber over it to the end. Jack in the box that are installed on a pushpull device of adjusting the high and medium pressure cylinder to end over and around to set up indicators to monitor data, general data about the difference must
范文總結相關推薦
鄂ICP備17016276號-1