【正文】 damaged electrical equipment, such as loosee connections and worn cables, to your supervisor. Make sure that no one can e into contact with such equipment before it is repaired. Stand close to the object you are going to lift, with your feet about 30 cm apart, one foot slightly in front of the other. Make sure the load is free before lifting takes place. All machines must have a maintenance plan with a person specified as being responsible. Keep the floor surface clean and free from obstacles around the machine. Make sure the bottles do not topple over when they are stored in the upright position. Some gas bottles, such as acetylene gas, must always be stored vertically. Remember that an acetylene gas bottle is never empty. Make sure gas hoses and welding cables can not obstruckt walkways, nor tangle or kink. Keep your personal ear protections in good condition. Look after the protective equipment well and report any defects. Make sure you know where the firstaid equipment is located.發現潛在的與工作環境相關的安全隱患極為重要。所有員工的協同合作將提供安全的工作環境和無事故的績效。 Transport5. Terms and definition6. Reporting of accident/near miss7. Safety signs and explanation8. Proposal of safety recognition and reward systems1. Safety Policy 無錫海德魯鋁業有限公司管理層相信事故預防和有效生產是同等重要的。 ElectricitySAFETY HANDBOOK員工安全手冊Content1. Safety policy2. Safety philosophies3. Applicable safety rules4. Safety instructions Compressed air我們的理念不是生產第一、安全第二，而是安全生產。在公司內應盡一切所能持續改進我們工作環境的安全。每位員工都有權利、有義務報告安全的行為及生產條件。 Find out where fireextinguishing equipment is located at your place of work. Always wear designated protective equipment within the work area.Eye protectionYour eyes are enormously sensitive to damage at work and can not be replaced. You can only lose your eyesight once – so protect your eyes! Never take off your ear protectors in a noisy area.Safety glovesSafety gloves must be worn when handling chemicals, hot metals and racks. Never use gloves when handling rotating machines.Safety shoesSafety shoes must be worn when entering manufacturing plant.Welding and cuttingThere are always two major risks in welding and torch cutting – the obvious danger of fire and the possible risk to health due to smoke or UV light from the electric welding torch. Strict precautions are therefore needed in welding operations. Make sure there is sufficient ventilation. If you are unsure, use a local evacuation device. Use clear labels, filled and empty bottles must be kept apart. Put on safety goggles when aworking with grinding and milling machines which have grinding wheels or when turning on a lathe. Maintenance must be dealt with by a person appointed by HAW according to a specified plan. Make sure no person is beneath moving loads. Tuck your chin in – avoid moving your head forwards or back. Make sure that the path to fuse cabinets and similar installations is clear, in case the power supply has to be switched off in an emergency. Never use power tools where the earth wire is not screwed tightly in the plug. Never use pressed air to blow away metal chips, debris or dirt etc without using personal protective equipment. Particles can blow into your eyes or ears or those of people nearby even at low pressure. Never taste or allow unknown products to e into contact with your skin, and only smell them with the greatest caution.Tools Hand tools, portable power tools or the ones operated by pressed airMost injuries involving hand tools are caused by damaged tools, tools that are used incorrectly or tools that have been wrongly stored. Store tools, hand lamps, cables and hoses in a safe and tidy condition. All kinds of material from nuts to planks may fall onto others from scaffolding, platforms, roofs and machines.Ladders – portable, fixedIf used correctly, portable ladders can offer a safe way of climbing up when working at heights. Never pull out an extension ladder further than indicated by the safety marking on the sides. Do not push your arm in through the ladder to adjust the safety catches, as the ladder may slip. Learn how to act in an emergency. Find out how and where you can call for help. If you are unsure, ask your supervisor. Monthly Safety Proposal Committee will choose proposals for “Participant Award” according to the following “Proposal assessment and approval standards” Practicability and feasibility of proposalsRewards and CertificatesEmployee who raises any constructive proposal will get “ Participant Award”, HSE dept. will distribute the award in 1 month after the proposal raised。 Report any leaks of bustible material you notice at once. Terms and definitionsAccident： A work related sudden and involuntary case, the result could be people injury and/or work interruption and /or lose of property, environment or the third party.Nearmiss：A work related sudden and involuntary case, no injury is caused in such a case. But could be evolved into accident under different circumstances. Unsafe behavior and unsafe working conditions are all included.Incident：Totality of accident and near missLost Time Injury (LTI) : The total number of cas