華三s12500交換機大pop點配置指導(存儲版)
【正文】 nameirfport2/1] quit激活S12510機框二設備的IRF端口配置，系統將提示發生IRF合并，用戶需要手工重啟其中機框二設備，加入以機框一設備為主設備的IRF。在本例中，使用S12510機框一作為主設備，因此需要重啟S12510機框二。創建VLAN 4091，并將S12510機框一（成員編號為1）上的端口TenGigabitEthernet1/0/0/20和S12510機框二（成員編號為2）上的端口TenGigabitEthernet2/0/0/20加入VLAN中。在缺省MDC中刪除機框一和機框二上的業務板2，并將該業務板分配給mdca。[Device] switchto mdc mdca******************************************************************************* Copyright (c) 20042015 Hangzhou H3C Tech. Co., Ltd. All rights reserved. ** Without the owner39。從虛擬交換機a返回缺省MDC。[DeviceA] interface bridgeaggregation 101[DeviceABridgeAggregation101] port linktype hybrid[DeviceABridgeAggregation101] undo port hybrid vlan 1[DeviceABridgeAggregation101] port hybrid vlan 20 untagged[DeviceABridgeAggregation101] qinq enable[DeviceABridgeAggregation101] quit 在下行端口bridgeaggregation 101的成員端口GigabitEthernet1/3/0/1和GigabitEthernet2/3/0/1的入方向上應用上行策略test。[DeviceA] traffic behavior test[DeviceAbehaviortest] nest topmost vlan 20[DeviceAbehaviortest] quit 創建策略test，為類test指定采用流行為test。[DeviceA] interface GigabitEthernet 1/3/0/1[DeviceAGigabitEthernet1/3/0/1] port linkaggregation group 101[DeviceAGigabitEthernet1/3/0/1] quit[DeviceA] interface GigabitEthernet 2/3/0/1[DeviceAGigabitEthernet2/3/0/1] port linkaggregation group 101[DeviceAGigabitEthernet2/3/0/1] quit 配置二層聚合接口101為Hybrid端口，并啟用qinq功能，允許VLAN 10的報文帶單層tag通過，允許VLAN 20的報文不帶tag通過。配置虛擬交換機a的帶外網管口的IP地址、使能Telnet服務等基礎配置，供用戶遠程登錄虛擬交換機a。 ** no depiling or reverseengineering shall be allowed.[Devicemdc2mdca] mdc startIt will take some time to start MDC...This MDC was started successfully.[Devicemdc2mdca] quit創建mdca。將機框一的TenG1/0/0/20和機框二的TenG2/0/0/20進行物理連線。 9 14:03:06:855 2013 STM/5/STM_MERGE: MDC=1。激活S12510機框一設備的IRF端口配置。[Sysname] quitSysname save(3)[Sysname] interface TenGigabitEthernet2/1/0/24[SysnameTenGigabitEthernet2/1/0/24] shutdown[SysnameTenGigabitEthernet2/1/0/24] quitPlease wait...[Sysname] interface TenGigabitEthernet1/0/0/24[SysnameTenGigabitEthernet1/0/0/24] undo shutdown[SysnameTenGigabitEthernet1/0/0/24] quitInfo: Member ID change will take effect after the member reboots and operates in IRF mode.2 IRF2堆疊組（二虛一）建立配置(1)Do you want to convert the content of the next startup configurati
環評公示相關推薦
鄂ICP備17016276號-1