某家用電器公司1101檢驗測量和試驗設備控制程序-免費閱讀
【正文】 c). The notes after the calibration conforms to the specification。報廢的檢測設備應作出標識，并及時隔離。 When the calibration of the IMTE can39。 Logistics Department shall inform the relevant departments to perform inspection and acceptance. If AICQ has no capability to perform inspection and acceptance, it may authorize a measurement authentication anization. 驗收合格的檢測設備由質量部負責按規定送外檢定或自行檢定合格后檢測設備才能交付使用。 The Engineering Department is responsible for the applicability of the inspection, measuring and test equipment. 采購物流部負責檢驗、測量和試驗設備（以下簡稱檢測設備）的采購。 This is applicable to the control of inspection, measurement amp。 Logistics Department for procurement after audit of the management representative and approval of GM Office. 專用檢具由制造部工藝人員設計，制造部設備部門負責自行制造或委外制造。 precision, initial date and user department. 校正 Calibration 質量部根據檢測設備一覽表，編制《周期檢定計劃》，經質量部主管審批，經總經理辦公室核準后實施。 The operating environment of the IMTE should meet the measurement requirements. 檢測設備的搬運、防護和貯存期間防止沖擊、碰撞等損傷應嚴格按使用說明規定執行，使其準確度和適用性保持完好，使用前檢查其校準狀態是否完好，并防止因調整不當而使其準確度失效。對所有量具、測量和試驗設備（包括雇員自備的）的校準活動記錄必須包括： a. 按工程更改進行的修訂（如適用）； b. 當接受校準時，任何偏離規范的讀數； c. 在校準后符合規范的說明； d. 如果可疑材料或產品可能已被發運，應通知顧客。 Record Sheet of Counting Gage” AICQ/QR110107A 《檢具檢定記錄表》 AICQ/QR110107A “Calibration Record for Inspection Equipment” 。 The personnel working on measurement must attend related technical training and pass the qualification test anized by the technical supervision authority. Only those who have obtained the Measurement Inspector qualification certificate are allowed to work post. 測量系統分析 Analysis of Measurement System 對于在控制計劃 中提及的所有可重復性測量器具和系統均須按《測量系統分析參考手冊》每年進行一次測量系統分析。 All users should operate the IMTE correctly and be responsible for the daily maintenance to make the equipment stay in good order. 發現檢測設備偏離校準狀態時，應停止使用，并通知質量部對檢測過的產品、項目重新評定
公司管理相關推薦
鄂ICP備17016276號-1