華三s12500交換機大pop點配置指導-免費閱讀
【正文】 [DeviceA] qos policy test[DeviceAqospolicytest] classifier test behavior test[DeviceAqospolicytest] quit 配置下行端口bridgeaggregation 101為Hybrid端口且允許VLAN 20的報文不攜帶VLAN Tag通過。[DeviceA] interface bridgeaggregation 101[DeviceABridgeAggregation101] port linktype hybrid[DeviceABridgeAggregation101] undo port hybrid vlan 1[DeviceABridgeAggregation101] port hybrid vlan 10 tagged[DeviceABridgeAggregation101] port hybrid vlan 20 untagged[DeviceABridgeAggregation101] qinq enable[DeviceABridgeAggregation101] qinq transparentvlan 10[DeviceABridgeAggregation101] quit5 QINQ規則配置(1)[MDCA] interface MGigabitEthernet 1/0/0/0[MDCAMGigabitEthernet1/0/0/0] ip address 24[MDCAMGigabitEthernet1/0/0/0] quit[mdca] telnet server enable[mdca] userinterface vty 0 63[MDCAuivty063] authenticationmode none[MDCAuivty063] userrole mdcadmin切換到虛擬交換機a，并按照提示信息鍵入CTRL_D進入虛擬交換機a的命令行界面進行配置。Device systemview[Device] mdc mdcaExecuting this mand will create MDC mdca ID 2 and empty folder /mdc/mdc2 in the root directory of the storage media. Continue? [Y/N]:yThis MDC was created successfully.3 MDC（一虛多）建立配置(1)配置BFD MAD檢測（堆疊組防分裂檢測） IRF merge occurs and the IRF system does not need to reboot.[Sysname] irfportconfiguration active創建IRF端口2/1，并將它與物理端口TenGigabitEthernet2/0/0/24和TenGigabitEthernet2/1/0/24綁定。Saving the converted configuration file to the main board succeeded.Slot 1:配置S12510機框二開啟TenGigabitEthernet1/1/0/24端口。關閉TenGigabitEthernet1/0/0/24端口。將設備的運行模式切換到IRF模式。Sysname systemview[Sysname] chassis convert mode irfThe device will switch to IRF mode and reboot. You are remended to save the current running configuration and specify the configuration file for the next startup. Continue? [Y/N]:y[Sysname] interface TenGigabitEthernet1/0/0/24[SysnameTenGigabitEthernet1/0/0/24] shutdown[SysnameTenGigabitEthernet1/0/0/24] quit[Sysname] interface TenGigabitEthernet1/1/0/24[SysnameTenGigabitEthernet1/1/0/24] undo shutdown[SysnameTenGigabitEthernet1/1/0/24] quit配置S12510機框二的成員編號為2。Saving the converted configuration file succeeded.[Sysname] irfport 2/1[Sysnameirfport2/1] port group interface TenGigabitEthernet 2/0/0/24[Sysnameirfport2/1] port group interface TenGigabitEthernet 2/1/0/24[Sys
環評公示相關推薦
鄂ICP備17016276號-1