機械外文文獻及翻譯-免費閱讀
【正文】 1)。 對于日益增加的樣本的調查影響，那三個附加的代替模型使用 100 個樣本是合適的， 結果編譯在附錄 B。提出的應用形態的輸出變量有 厚度和鏈接高度以及拓?fù)渥兞繄?zhí)行機構類型。 在這個 過程中 ,速度和加速度 的鏈接 會被反復計算 ,遞歸地向前 。 此外 ,每個執行機構的類型和結構實例是 由 用戶定義的 。 圖 2 致動器 (左 ),基準 (中心 )和結構 HLCt(右 ) 引用的名稱 ,必須為每個存儲在通過推理引擎 才能搜索到的知識庫的 HLCt 實例提供。 CAD 模板 —— 幾何模型 傳統上 ,參數化 CAD 主要集中在幾何形態的變化 。這些都是生產和存儲在庫中 ,使 工程師或計算機代理可能首先選擇模板 ,然后修改形態、意義的形狀 ,每個模板參數化。 Datum HLCt which includes wireframe references required for placement for the Actuator HLCTs and Structure HLCts, as seen . 內蒙古工業大學本科畢業設計外文翻譯 3 Fig. 2 An industrial robot (left) and a modular industrial robot(right) The names of the references that must be provided for each HLCt instantiation are stored in the knowledge base (see Appendix ), which is searched through by the inference engine. In Appendix A, pseudocode examples describes how the references are retrieved and how they are stored in the knowledge base. The process starts by the user defining the number of degrees of freedom (DOF) of the robot (see Fig. 3) and is repeated until the number of axis (i) is equal to the user defined order to instantiate the first Structure HLCt, two Datum and two actuator instances are needed. References from the two Datum instances help orienting the structure in space, while the geometries of the actuator instances, at both ends of the link, are used to construct the actuator attachments, as seen in Figs. 2 and 3. For the remaining links, only one new instance of both datum and actuator HLCts are required, since the datum and actuator instances from adjacent links are already shows a pseudocode example of an instantiation function. The first instantiated datum HLCt is defined with reference to the absolute coordinate system. The remaining datum HLCt instances are placed in a sequential order, where the coordinate system of previous instances is used as reference for defining the position in space according to user inputs (see also ). Furthermore, the type of each actuator and structure instance is user defined. 內蒙古工業大學本科畢業設計外文翻譯 4 Fig. 3 The high level CAD template instantiation process Since it is possible to create new HLCts in the utilized CAD tool, the users are not forced to merely choose from the templates available. New HLCts can be created, placed in the database and parametrically inserted into the models. Dynamic Model The objective of performing dynamic simulation of a robot is to evaluate system performance, such as predicting acceleration and time performance, but it also yields loads on each actuated axis, needed for actuator lifetime calculations and subsequent stress analysis based on
公司管理相關推薦
鄂ICP備17016276號-1