外文文獻翻譯plc控制下的電梯系統-預覽頁
【正文】 ator button or contact with the call of the button, and general elevator at both ends of the standing on the call box set a button or touch knob, standing among the call of the box set the two button or touch the button, and the elevator is set up inside the car have (bulk elevator except) control box. Operation box set on a handle switch or layer stand the corresponding button or touch knob on the operation box button or contact the mand button button or touch buttons. The mand button or contact the electrical signals a button called external mands, inside the instructions of a button or touch knob signal called mands within. The mid 1980 s, touch button has been budge button replaced. As the elevator of the base outside the hall call box, in addition to set a call button or touch knob outside, still set a key switch to shut off the elevator, the driver or management personnel to open to the base station, with special twist the key can be key switch, the elevator door is closed after the hall, automatically cut off the elevator control power or power power supply. 4. PLC control of elevator design With the continuous development of city construction, high building is on the increase, the elevator in the national economy and life in a wide range of applications. The lift, as the highrise buildings in the vertical transportation operation has and People39。s not much difference. Domestic manufacturer mostly choose the second method, and the reason is that production is small in scale, their design and manufacturing microputer control device cost is higher。 電梯繼電器控制系統故障率高，大大降低了電梯的可靠性和安全性，經常造成停梯，給乘用人員帶來不便和驚擾，且電梯一旦發生沖頂或蹲底，不但會造成電梯機械部件損壞，還可能出現人生事故。因此PLC 控制技術加頻調速技術已成為現代電梯行業的一個熱點。 （ 4） PLC 可進行故障自動檢測與報警顯示，提高運行安全性 ，并 便于檢修。電動機交流變頻調速技術是當今節電、改善工藝流程以提高產品質量和改善環境，推動技術進步的一種主要手段，變頻調速以其優異的調速性能和起制動平穩性能，高效率，高功率因數和節電效果，廣泛的使用范圍以及其它許多優點而被國內外公認為最有發展前途的調速方式。其特性可適應人體感受，并保證運行噪聲小，制動平穩。因此消除了振動和噪聲。它采用交流電動機驅動，卻可以達到直流電動機的水平。設在一樓的起點站稱為基站，起點站和終點站稱為兩端站，兩端站直接按稱為中間站。 20 世紀 80 年代中期后，觸鈕已被微動按鈕所取代。實際上，電梯是根據外部呼叫信號以及自身控制規律等運行，而呼叫是隨機的，電梯實際上是一個人機交互式的控制系統，單純用順序控制或邏輯控制是不能滿足控制要求的。
研究報告相關推薦
鄂ICP備17016276號-1