柴油機氣缸蓋三面鉆床總體及夾具設計-全文預覽
【正文】 ，因此，本設備的主要功能是完成柴油機機體左、右、后三個面上7個孔的加工。夾具設計時，首先確定工件的定位方案，然后選擇夾緊方案，估算夾緊力大小，選擇夾緊液壓缸的型號，最終完成夾具的零部件設計。根據選擇的切削用量，計算刀具的切削力、切削扭矩、切削功率等，再確定刀具的大小和型式。本說明書以設計臥式三面鉆螺紋底孔組合機床為主線，闡述了刀具的選擇和夾具設計的過程。我主要負責夾具部分的設計，總體設計由我和另外兩位同學共同完成?，F(xiàn)在該集團迫切需要改善現有的生產條件，進行提高生產率、改善產品質量方面的技術改造，使產品的合格率上升，增加產量，適應市場競爭的需要，提高經濟效益。在組合機床方面，總體水平不高，國際競爭力不強，不能充分滿足國內建設需要，關鍵技術過分依賴國外，自主發展能力薄弱，高技能人才的比較優勢有弱化的危險，產品質量不穩定，用戶服務水平差距較大。其二，隨著組合機床在我國機械行業的廣泛使用，廣大工人總結自己生產和使用組合機床的經驗，發現組合機床不僅在其組成部件方面有共性，可設計成通用部件，而且一些行業在完成一定工藝范圍內組合機床是極其相似的，有可能設計為通用機床，這種機床稱為“專能組合機床”。另外，近年來組合機床加工中心、數控組合機床、機床輔機(清洗機、裝配機、綜合測量機、試驗機、輸送線)等在組合機床行業中所占份額也越來越大。在當今的發展趨勢中，一臺組合機床如果不能完成全部的工藝過程，這時往往把幾臺機床布置流水線，大大縮短了加工時間。由于通用部件已標準化和系列化，可根據需要靈活配置，能縮短設計和制造周期。關鍵詞：組合機床；夾具；氣缸蓋 本設計來自：完美畢業設計網登陸網站聯系客服遠程截圖或者遠程控觀看完整全套論文圖紙?jiān)O(shè)計客服：8191040 The Overall and Fixture Design of Modular Machine Tool for Drilling Holes of Diesel Engine Cylinder Head Abstract: The design project is from Jiangdong Dynamic Group of Yancheng. Considering the large quantity of cylinder head needed by diesels, a modular machine tool is designed to improve the accuracy and efficiency of diesel production. The machine tool is designed for the cylinder head left and right, after a sevenlevel processing at the same time, low productivity,location accuracy error of major issues. The design is mainly focused on both the overall design and jig design. The overall design specifse detailed analysis of processing techonology, choice of such factors as the positioning datum of processing, grip program, proper cutting parameters, cutting tools, the configuration types of machine tools, the proper construction program and so on. Meanwhile the drawing of “Three Charts and One Card” are design, the first to identify the workpiece positioning programme, and the select clamping programme, estimates clamping force size, the choice of clamping cylinder model, the final fixture of the parts design. Finally, according to the results drawn fixture assembly and major parts of the map. As far as jigs are concerned,
環評公示相關推薦
鄂ICP備17016276號-1