【正文】 unqualified personnel may cause electric shock or fire. Install the unit on a sturdy floor. If the floor is not strong enough or the installation site is not adequate, this may result in injury from the unit falling or tipping over. Never install the unit in a humid place or a place where it is likely to be splashed by water. Deterioration of the insulation may result which could cause current leakage or electric shock. Never install the unit in a flammable or volatile location. This may cause explosion or fire. Never install the unit where acid or corrosive gases are present as current leakage or electric shock may result due to corrosion. Use a dedicated power source as indicated on the rating label attached to the unit. Ensure that a suitable fuse of adequate amperage is used to allow for pressor start up. Remove dust from the power supply plug before inserting in a power source. A dusty plug or improper insertion may pose a hazard. Use a power supply outlet with ground (earth) to prevent electric shock. If the power supply outlet is not grounded, it will be necessary to install a ground by qualified engineers. Never ground the unit through a gas pipe, water main, telephone line or lightning rod. Such grounding may cause electric shock in the case of an inplete circuit. Do not insert metal objects such as a pin or a wire into any vent, gap or any outlet for inner air circulation. This may cause electric shock or injury by accidental contact with moving parts. Never store volatile or flammable substances in this unit. This may cause explosion or fire. Never store corrosive substances in this unit. This may lead to damage to the inner ponents or electric parts. If this unit is to be used for storing poisons, radioactive material or other harmful products, ensure that it is in a safe area. Failure to do so may lead to an adverse effect on the health of personnel in the area and the local environment. In this case, a request for repair or maintenance will necessitate a safety check sheet for maintenance personnel. WARNING 4 PRECAUTIONS FOR SAFE OPERATION Disconnect the power supply to the unit prior to any repair or maintenance of the unit in order to prevent electric shock or injury. Ensure you do not inhale or consume medication or aerosols from around the unit at the time of maintenance. These may be harmful to your health. Never splash water directly onto the unit as this may cause electric shock or short circuit. Never disassemble, repair, or modify the unit yourself. Any such work carried out by an unauthorized person may result in fire or injury due to a malfunction. Disconnect the power supply plug before replacement of the florescent light to prevent electric shock. Disconnect the power supply plug if there is something wrong with the unit. Continued abnormal operation may cause electric shock or fire. If the unit is to be stored unused in an unsupervised area for an extended period, ensure that children do not have access and that doors cannot be closed pletely. The disposal of the unit should be undertaken by appropriate personnel. Remove door to prevent accidents such as suffocation. Prepare a safety check sheet when you request any repair or maintenance for the safety of service personnel. Do not pull out more than 2 drawers at the same time (MBR304DR, MBR304GR) when storing or taking out of the stocked material. This may cause injury by falling or tipping of the unit if something heavy items are stored. Select a level and sturdy floor for installation. This precaution will prevent the unit from tipping. Improper installation may result in water spillage or injury from the unit tipping over. Never install the unit in a place where the possibility exists that an object may fall on it. There are cooling circuits and electric ponents in the upper part of this unit. Current leakage or electric shock may be caused if an object falls on it. WARNING CAUTION 5 PRECAUTIONS FOR SAFE OPERATION Connect the unit to a power source as indicated on the rating label attached to the unit. Use of any other voltage or frequency other than that on the rating label may cause fire or electric shock. Fix the shelves securely (MBR304D, MBR304G). Inplete installation may cause injury or damage. When removing the plug from the power supply outlet, grip the power supply plug, not the cord. Pulling the cord may result in electric shock or fire by short circuit. Never damage or break the power supply plug or cord. Do not use the supply plug if its cord is loose. This may cause fire or electric shock. Do not touch any electrical parts such as the power supply plug or any switches with a wet hand. This may cause electric shock. Do not put a container with water or heavy articles on the unit. Injury may be caused if the articles fall. Current leakage or electric shock may result from the introduction of spilled water into electrical ponents. Do not climb onto the unit. This may cause damage to the unit and cause it to tip over. Hold the handle when closing the door. This will reduce the likelihood of a trapped finger. Do not lean on the door. This may cause injury if the unit tips over. Never place your hand on the glass or use excessive force on the glass. Intentional force may break the glass resulting in injury from the broken glass. Do not touch the condenser directly when the filter is removed for cleaning. This may cause injury due to hot surface. Disconnect the power supply plug before moving the unit. Take care not to damage the power cord. A damaged cord may cause e