freepeople性欧美熟妇, 色戒完整版无删减158分钟hd, 无码精品国产vα在线观看DVD, 丰满少妇伦精品无码专区在线观看,艾栗栗与纹身男宾馆3p50分钟,国产AV片在线观看,黑人与美女高潮,18岁女RAPPERDISSSUBS,国产手机在机看影片

正文內容

分析vcore的33v5v力量管理者電路(1)(文件)

2025-02-05 11:19 上一頁面

下一頁面
 

【正文】 ency) TimesNumber channels.. . 100kHz to 6MHzThe features of controller HIP630122 Introduce the HIP6301 controller (Cont.)23 Introduce the HIP6301 controller (Cont.)Pin DescriptionPIN NAME FUNCTION1,2,3,4,5 VID(4..0) Voltage Identification inputs from microprocessor. These pins respond to TTL and logic signals. The HIP6301 decodes VID bits to establish the output voltage.6 COMP Output of the internal error amplifier. Connect this pin to the external feedback and pensation work.7 FB Inverting input of the internal error amplifier.8 FS/DIS Channel frequency, FSW, select and disable. A resistor from this pin to ground sets the switching frequency of the converter. Pulling this pin to ground disables the converter and three states the PWM outputs.9 GND Bias and reference ground. All signals are referenced to this Pin.10 VSEN Power good monitor input. Connect to the microprocessorCORE voltage.24 Introduce the HIP6301 controller (Cont.)Pin DescriptionPIN NAME FUNCTION11,14,15,18 PWM(1..4)PWM outputs for each driven channel in use. Connect thesepins to the PWM input of a driver. For systems which use 3 channels, connect PWM4 high. Two channel systems connect PWM3 and PWM4 high.12,13,16,17ISEN(1..4) Current sense inputs from the individual converter channel’s phase nodes. Unused sense lines MUST be left open.19 PGOOD Power good. This pin is an opendrain logic signal that indicates when the microprocessor CORE voltage (VSEN pin) is within specified limits and SoftStart has timed out.20 VCC Bias supply. Connect this pin to a 5V supply.25 Introduce the HIP6301 controller (Cont.)The phase relationship between the channels is 360 degree/number of active PWM channels26 Analyze the CPU Vcore regulator Schematics274. Conclusions? MultiPhase circuit is the proper power solution for today’s notebook PC CPU? Constrains to acmodate the following factors:input voltage range, load dynamic range,ponent value tolerance variation,temperature change, etc.28QAThanks29。 SEQ = VL: before 5V, RESET output determined by both outputs16 DH5 GateDrive Output for the 5V, highside N
點擊復制文檔內容
環評公示相關推薦
文庫吧 www.dybbs8.com
備案圖鄂ICP備17016276號-1