畢業設計--數控機床潤滑系統的設計-wenkub
2022-12-12 19:31:48 本頁面
【正文】 ecision machine tools, prolong service life and so on, all have very important role. But in the lubricating system of electrical control, still exist in the following problems: one is the lubrication system working condition monitoring. CNC machine control system in general only a tank oil noodles monitoring, in case oilsupplied insufficient, and for lubrication system easy appear oil, fuel blockage phenomenon, cannot make timely response. 2 it is setting of lubrication oil of circulation and give time onefold, easy to cause the waste. Nc machine tools in different work condition, need lubricating dose is different, such as in the machine tool suspended stage than processing stage need lubricating oil amount to little. In view of the above situation, on the nc machine, electric control system for lubrication control parts were improved design, the time monitoring lubrication system, to ensure the working conditions of the machine mechanical parts get good lubrication, and also may according to the working state of the machine tool, automatic adjustment oilsupplied, cycle time, so as to save the lubricating oil. Lubrication system working condition monitoring Keywords： instrument、 the control device、 lubrication syste 目 錄 第一章 數控機床概述 ............................................... III 第一節 數控機床的特點 ......................................... III 第二節 數控機床的組成和工作原理 ................................ IV 第二章 數控機床的分類 .............................................. VI 第一節 按加工工藝方法分類 ...................................... VI 第二節 按驅動裝置的特點分類 .................................... VI 第三章 機床結構的發展 .............................. 錯誤 !未定義書簽。二是設置的潤滑循環和給油時間單一，容易造成浪費。潤滑系統之所以得到如此廣泛的應用，主要是由于機械儀器之間的摩擦過于損壞機械本身，潤滑系統能幫助保護以至于不造成太大的損壞。 機床潤滑系統的設計、調試和維修保養，對于提高機床加工精度、延長機床使用壽命等都有著十分重要的作用。數控機床在不同的工作狀態下，需要的潤滑劑量是不一樣的，如在機床暫停階段就比加工階段所需要的潤滑油量要少。 第 一節 數控機床的發展 .......................................... IX 第二節 自適應控制 .............................................. IX 第四章 數控機床潤滑系統控制的改進 ................................. VII 第一節 潤滑系統工作狀態的監控 ................................. VII 第二節 潤滑時間及潤滑次數的控制 .
公司管理相關推薦
鄂ICP備17016276號-1