土木外文翻譯--抗側向荷載的結構體系-建筑結構-wenkub
2023-05-19 14:24:31 本頁面
【正文】 e better highrise buildings carry the universal traits of simplicity of thought and clarity of expression. It does not follow that there is no room for grand thoughts. Indeed, it is with such grand thoughts that the new family of highrise buildings has evolved. Perhaps more important, the new concepts of but a few years ago have bee monplace in today’ s technology. Omitting some concepts that are related strictly to the materials of construction, the most monly used structural systems used in highrise buildings can be categorized as follows: 1. Momentresisting frames. 2. Braced frames, including eccentrically braced frames. 3. Shear walls, including steel plate shear walls. 4. Tubeintube structures. 5. Tubeintube structures. 6. Coreinteractive structures. 7. Cellular or bundledtube systems. Particularly with the recent trend toward more plex forms, but in response also to the need for increased stiffness to resist the forces from wind and earthquake, most highrise buildings have structural systems built up of binations of frames, braced bents, shear walls, and related systems. Further, for the taller buildings, the majorities are posed of interactive elements in threedimensional arrays. The method of bining these elements is the very essence of the design process for highrise buildings. These binations need evolve in response to environmental, functional, and cost considerations so as to provide efficient structures that provoke the architectural development to new heights. This is not to say that imaginative structural design can create great architecture. To the contrary, many examples of fine architecture have been created with only moderate support from the structural engineer, while only fine structure, not great architecture, can be developed without the genius and the leadership of a talented architect. In any event, the best of both is needed to formulate a truly extraordinary design of a highrise building. While prehensive discussions of these seven systems are generally available in the literature, further discussion is warranted here .The essence of the design process is distributed throughout the discussion. MomentResisting Frames Perhaps the most monly used system in lowto mediumrise buildings, the momentresisting frame, is characterized by linear horizontal and vertical members connected essentially rigidly at their joints. Such frames are used as a standalone system or in bination with other systems so as to provide the needed resistance to horizontal loads. In the taller of highrise buildings, the system is likely to be found inappropriate for a standalone system, this because of the difficulty in mobilizing sufficient stiffness under lateral forces. Analysis can be acplished by STRESS, STRUDL, or a host of other appropriate puter programs。 these columns are perhaps 15% stiffer as they follow the elastic curve of the braced core. Note also that the axial forces associated with the lateral forces in the inner columns change from tension to pression over the height of the tube, with the inflection point at about 5/8 of the height of the tube. The outer columns, of course, carry the same axial force under lateral load for the full height of the columns because the columns because the shear stiffness of the system is close to zero. The space structures of outrigger girders or trusses, that connect the inner tube to the outer tube, are located often at several levels in the building. The ATamp。實際上，正是因?yàn)橛辛诉@種宏觀的構思，新奇的高層建筑體系才得以發展，可能更重要的是：幾年以前才出現的一些新概念在今天的技術中已經變得平常了。
畢業設計相關推薦
鄂ICP備17016276號-1