電風扇搖頭機構設計畢業論文設計(已修改)
2025-08-17 10:04 本頁面
【正文】 JIUJIANG UNIVERSITY畢 業 設 計 題 目 電風扇搖頭機構設計 英文題目 design head of electric fan 院 系 機械與材料工程學院 專 業 機械設計制造及自動化 二零一四 年 六 月 摘 要電風扇搖頭裝置設計是從電風扇設計開始的，也是電風扇設計中最重要的部分，對于電風扇的研究，國內外已有不少的研究成果，但在創新這一塊做的還不夠, 還有待進一步完善。本文首先對搖頭電風扇的歷史和發展現狀以及其類型和特點進行了介紹，然后介紹了設計準則, 提出方案擬定, 并選擇最優方案,主要是現有的電風扇搖頭裝置中平面搖桿機構，包括平面搖桿機構的結構、工作原理、設計原理、設計原則；其次根據已知原動機的轉速, 分配傳動比，選擇合適的機構, 如蝸輪蝸桿機構以及齒輪機構, 根據傳動比確定它們的基本參數，設計計算幾何尺寸,再次采用圖解法, 根據已知條件(極位夾角, 搖桿速度等)設計平面四桿機構, 然后在實驗室組建仿真機構模型, 觀察所設計的尺寸是否滿足所需的運動軌跡，再就制作臺式電風扇搖頭平面機構的計算機動態演示, 通過圖解法研究各桿件的運動, 進行運動分析, 最后總結并講述了電風扇的未來展望。關鍵詞： 平面搖桿機構，傳動比, 蝸輪蝸桿, 齒輪傳動, 運動分析 ,動態演示 AbstractThe design of the shaking equipment of fans is the beginning of the design of electric fans, and it is the most important part of the electric fans design at home and abroad, there are many research results, but in this one innovation has not done enough and has yet to be further improved.In this paper, shaking equipment on the history and development of electric fans and the status of its type and characteristics were first introduced, and then introduced the design for the proposed programming, and choose the best, mainly the existing fans installed in the plane shook his head rocker agencies, including Rocker plane the structure, working principle, design principles, design principles。 Secondly choosing the appropriate agencies on the basis of known motive of the original speed, the distribution of transmission ratio, such as the worm gear worm agencies and institutions, according to the transmission ratio to determine their basic parameters, design and calculation geometry, again using graphic method, in accordance with the known conditions ( Aangle, rocker speed, etc.) designed plane four bodies, and then set up in the laboratory simulation model agencies to observe whether the size of the design to meet the required trajectory, and desktop fans on the production of the plane shook his head dynamic puter Demonstration, through the preparation of ICC procedures on the movement of the bar, exercise analysis. At last conclude and introduce about the future prospects of the fans. Key words: Plane rocker。 transmission ratio。 Worm Gear。 Gear。 sports analysis。 dynamic demo目 錄 摘要i Abstractii 第一章 引言1 電風扇發展現狀和前景展望 1 臺扇的結構與工作原理1 第二章 電風扇搖頭裝置機構的設計3 電風扇搖頭裝置機構設計概述3 電風扇搖頭裝置機構設計原則3 方案擬定3 Ⅰ (離合式搖頭機構)3 Ⅱ (锨撥式搖頭機構)4 方案 Ⅲ (平面連桿搖頭機構)183
環評公示相關推薦
鄂ICP備17016276號-1