模具術語中英文對照資料(已修改)
2025-08-02 07:03 本頁面
【正文】 Mold Terminology模具術語ADDiameter The tread diameter at the centerline of the tread (EU)。 also: TDiameter(GT) AD直徑：指胎面中心線直徑（EU）。又叫T直徑（GT）Autolock Ear A Lug on the cone ring used to mount the mold/container in the top half of a 60“ NRM Autolock press.導環上的突緣，用于和60“ NRM Autolock 硫化機上半部連接。Bead Ring The tire bead forming ring (also: toe ring) 鋼圈，也稱 toe ringBead Ring Register The landing and tapered seat that the bead ring fits into鋼圈配合：側板上，和 鋼圈配合的平面及錐面Bottom Container Plate The plate that the bottom sidewall plate is bolted to 模殼底座Bottom Container Plate Lifting Lug A lug attached to the Bottom Container Plate with Horizontal holes used for lifting.模殼底座吊耳： 裝配在底座上、有水平的孔，用來吊裝的吊耳Bottom Container Plate Dowel Pin Lug A lug attached to the Bottom Container Plate that supports the Dowel Pin Bushing. 裝配在底座上，用來支承定位銷套的突緣Bottom Container Plate Hold Down A lug that is used to fix the Bottom Plate in the Press. 用來將底座裝配在硫化機上的突緣Breaker Hook A hook fixed to the bottom of the tread segment that catches the bottom container plate only when the segment will not release from the tire during demolding.分離鉤：固定在花紋塊底部的鉤子，輪胎硫化完后若花紋塊不能跟輪胎分離，就用此鉤抓住模殼底座幫助花紋塊和輪胎進行分離。Breaker Hook Guide PieceA block bolted to the breaker hook that aligns the tread segment with a slot in the bottom container plate. 分離鉤導塊：用螺栓固定在Breaker Hook上，定位花紋塊和模殼底座上槽的定位塊。Bronze Wear Plates Any sacrificial metal plate placed under, over or behind a ponent to keep the ponents from wearing on each other (greasing) 青銅耐磨板(油潤滑的)Casting An unmachined cast metal tread ring or Segment 鑄件：未加工的金屬花紋圈或花紋塊鑄件。Centering Ring The ring mounted on the bottom press platen to locate the mold/ container concentrically to the press。 also: Press register定中環,也稱“Press register”Clamp Rings The bladder clamping assembly 膠囊?jiàn)A盤Cone Ring The outer ring that transforms the axial movement of the press in a radial one of the segments。 also: Actuator ring, Squeeze ring (GT)導環，也稱Actuator ring, Squeeze ringConicity Difference between tread radius over the width 錐度Container The mechanical parts that allow a segmented mold to operate。 also: mechanism (GT) 模殼,也叫 mechanismConta
公司管理相關推薦
鄂ICP備17016276號-1