畢業論文初稿(晶體管運算放大器設計)(已修改)
2025-07-06 19:55 本頁面
【正文】 南京信息職業技術學院畢業設計(論文)說明書作者 學號 系部 電子信息學院 專業 無線電（微波技術與器件） 題目 晶體管運算放大器的設計 指導教師 評閱教師 完成時間： 2011 年 4 月 28 日 畢業設計(論文)中文摘要題目：晶體管運算放大器的設計摘要：運算放大器（常簡稱為“運放”）是具有很高放大倍數的電路單元。在實際電路中，通常結合反饋網絡共同組成某種功能模塊。運放是一個從功能的角度命名的電路單元，可以由分立的器件實現，也可以實現在半導體芯片當中運算放大器的基本放大電路有四部分組成：輸入級，偏置電路，中間級，輸出級。其中：輸入級：是決定運算放大器性能關鍵的一級，要求他的零點漂移小，輸入阻值高，所以都采用差分電路；偏置電路：對各級提供偏置電壓，使各級具有適當?shù)撵o態工作點；中間級：是將輸入級輸出地信號電壓加以放大，一般由共射級放大電路構成；輸出級：輸出級直接與負載相連，所以這一級要有足夠的電壓放。本文將用晶體管等元器件完成一個非集成運放的設計。關鍵詞：運算放大器 晶體管 非集成 設計 畢業設計(論文)外文摘要Title: Transistor amplifier design Abstract: Operational Amplifiers (often referred to as op amp) is a high magnification of the circuit unit. In the actual circuit, usually with some kind of feedback network posed of functional modules together. Op amp is a name from a functional perspective, the circuit unit, can be realized by the discrete devices, semiconductor chips can also be achieved among the The basic amplifier circuit op amp has four parts: the input stage, bias circuit, the middle class, the output level. Of which: the input stage: the key is to determine the performance of an op amp, asking him to zero drift, high input resistance, so are differential circuit。 bias circuit: bias voltage provided at all levels, at all levels with the appropriate static operating point。 the middle class: is the signal voltage of the input stage output to be amplified, usually by the monemitter stage amplifier circuits。 output level: output stage is connected directly to the load, so that a sufficient voltage discharge. This article will use transistors and other ponents to plete a nonintegrated operational amplifier design. key words: nonintegrated oper
研究報告相關推薦
鄂ICP備17016276號-1