課程名稱機械制造技術基礎雙語a(已修改)
2025-07-06 06:22 本頁面
【正文】 教 案4課程名稱：機械制造技術基礎雙語A授課教師譚慶昌所在單位機械學院機械制造系課程類別課堂理論教學授課時間07～08學年2學期2周授課內容2 Cutting Processes and their Control Basic Theory of Cuttingtool Deformation during the cutting process授課對象機械工程、車輛工程、農業機械、汽運工程、交通工程專業本科生教學內容提要時間分配備注（b）Influence of the tool mounting position on working anglesWhen the tool tip is higher or lower than the axis of the workpiece, the working rake angle and relief angle will change.以圖211為例，如果刀尖安裝得高于工件中心，實際工作前角將大于標注前角，工作后角將小于標注后角。如果刀尖安裝低于工件中心，則恰好相反。When the mean line of the tool holder is not perpendicular to the feed direction, the working cuttingedge angleκr and the minor cuttingedge angleκrˊ. will change () . MaterialsA cuttingtool must have certain characteristics in order to produce goodquality and economical parts.1. Certain characteristics that a cuttingtool must have（a）High hardness and wearresistance （b）Enough strength and toughness（c）High heat resistance（d）Good heat conductivity and thermal shock resistance（e）Good processability2. Cuttingtool materials most in use(a) Highspeed steels高速鋼是加入了較多的鎢（）、鉬（）、鉻（）、釩（）等合金元素的高合金工具鋼。高速鋼具有較高的硬度（）和耐熱性，在切削溫度高達℃時仍能進行切削；高速鋼的強度高、韌性好，可在有沖擊、振動的場合應用；它可以用于加工有色金屬、教學內容提要10分鐘
化學相關推薦
鄂ICP備17016276號-1