【正文】
三 江 學 院 本科生畢業設計(論文) 題 目 基于單片機的電容電感測量系統設計 電氣與自動化工程學院 院(系) 電氣工程及其自動化 專業 學生姓名 吳含 學號 12020071010 指導教師 康明才 職稱 副教授 指導教師工作單位 南京理工大學 起訖日期 摘 要 隨著電子工業的發展,電子元器件急劇增加,電子元器件的適用范圍也逐漸廣泛起來,在應用中我們常常要測定電容電感的大小。因此,設計可靠,安全,便捷的電容電感測試儀具有極大的現實必要性。 本文分析測量了電容和電感量原理并且研究了單片機測量頻率的方法,介紹了以 MCS51 單片機為核心的電容電感測量系統的設計,將電容電感使用對應的振蕩電路轉化為頻率實現各個參數的測量。該測試儀具有低功耗、高精度、攜帶方便等特點,把所測數據保存在單片機里,然后通過 LCD 顯示。其中電容是采用 555多諧振蕩電路產生的,而電感則是根據電容三點式產生的。本設計采用 Keil51 為仿真平臺,設計測量系統軟件包括主程序模塊、顯示模塊、電容測試模塊和電感測試模塊。最后測試結果表明,本設計性能穩定,測量精度高。 關鍵詞: MCS51 單片機; Keil51 仿真平臺;電容;電感; LCD Abstract With the development of electronic industry, electronic ponents rapidly increased the scope of electronic ponents bees more and more popularin the application,we often measured the size of the inductor and ,the design of reliable,safe,has a great practical necessity capacitance inductance tester convenient. This paper analyzes the method to measure the capacitance and inductance of the principle and measure the frequency of SCM,the system design of capacitance and inductance measurement using MCS51 microcontroller as the core of the oscillation circuit capacitance and inductance using the corresponding frequency into the measurement parameters to achieve instrument has the characteristics of low