本科畢業論文-塑料齒輪注塑模具設計說明書(已修改)
2025-06-19 17:00 本頁面
【正文】 第 1 頁 共 53 頁 目錄 塑料齒輪注塑模具設計 2 摘要： 2 1 前言 2 2 模流分析報告 1 3 制件的工藝設計分析 18 4 分型面的設計 26 5 澆注系統的設計 27 6 模具成型零部件的設計 33 7 合模導向機構的設計 38 8 模具的工作過程原理 40 結論 43 致謝 44 參考文獻 45 淮陰工學院畢業設計說明書 （論文） 第 2 頁 共 53 頁 2 塑料齒輪注塑模具設計 摘要： 本課題研究的是塑料齒輪注塑模具，塑料齒輪多應用于儀表、兒童玩具車和機械相機等等，塑料齒輪要求有比較高的強度和一定的柔韌性，所以我們選擇了力學綜合性能比較好的塑料材料 ABS。在設計過程中，我們先對塑料齒輪制件進行工藝分析和模流分析，來選取合適的模架和注塑機等等。經過制件工藝性分析和模流分析，知該制件為小型塑件，相應地需要設計小型模架和注塑機，該模具適合采用一出四腔雙分型面模具結構，采用細水口三板模模架，在齒輪頂面勻布設置三個點澆口注膠。 關鍵詞： ABS 雙分型面 一模四腔 細水口 Abstract: The research is about the injection mould for plastic gears, the plastic gear is more and more for instrument, children39。s toy cars and mechanical camera and so on, the plastic gear requirements relatively high strength and a certain degree of flexibility, so we choose the ABS with the better prehensive mechanical properties. In the design process, first we have a technology analysis and a mould flow analysis for the plastic gears to select the suitable mold and injection molding machine and so on. After stamping process analysis and mold flow analysis,we know, the parts is small, accordingly we need to design small mold and injection molding machine, the mold is suitable to use the mold structure of a four cavity with double parting surfaces and the mold with thin fine nozzle and three plate mold,on the gear top surface we set three pin point gate to inject plastic. Keywords: ABS double parting surface a mold with four cavity thin fine nozzle 1 前言 在討論注塑模設計之前，我們先對國內外的塑料模具工業的狀況、塑料模具工業
畢業設計相關推薦
鄂ICP備17016276號-1