【正文】
附 錄 Drive axle powertrain at the end of their basic function is to increase the transmission came from the drive shaft or torque, and a reasonable distribution of power to the left and right wheel, in addition to acting on the road and under the frame or body legislation between the vertical, longitudinal and lateral force. General from the main drive axle reducer, differential, gear wheels and drive axle housings and other ponents. The design of the Drive axle: Drive axle should be designed to meet the basic requirements are as follows: 1. Select the main reduction ratio should be able to ensure the car has the best power and fuel economy. 2. Smaller size, to ensure that the necessary ground clearance. 3. Gear and other pieces of the work of a smooth transmission,and small noise. 4. In a variety of speed and load with a high transmission efficiency. 5. In ensuring adequate strength and stiffness conditions, should strive for the quality of small, especially under the massspring should be as small as possible in order to improve vehicle ride fort. 6. And suspension movementoriented coordination of steering drive axle, but also with the coordination of steering movement. 7. The structure of simple, good processing, manufacturing, easy disassembly, to facilitate adjustment. Drive axle classification At nondrive axle disconnect disconnectstyletype with two broad categories. 1. Nondisconnecttype drive axle Nondisconnecttype drive axle also known as integrated drive axle, the axle casing and the main shaft reducer with shell shell and connected to a rigid beam, which on both sides of the axle and wheel related to swing through the flexible connected with the frame ponents. It consists of drive axle housing 1, the main reducer, differential and axle ponents. 2. disconnecttype drive axle. Drive the use of independent suspension bridge, that is the main reducer shell fixed on the vehicle chassis, on both sides of the axle and wheel in the horizontal plane as opposed to relative movement of the body is refer