論文中英文翻譯對照通過注射成型制造壓電陶瓷聚合物復合材料-文庫吧
2024-07-26 12:11 本頁面
【正文】 污染影響。通過陶瓷的注射成型來制造合成物型坯，之后使用型坯來形成大批生產，此種方法已經證明用于網狀大量制造壓電復合物傳感器。致謝 這項工作由海軍研究事務所的Stephen 。作者要感謝Hong Pham女士提供的技術援助，以及材料研究實驗所的Tomas Shrout博士，賓州州立大學所做的電器測量工作。參考文獻[1] R. E. Newnham等著，《復合壓電式傳感器》，材料工程，第二卷，93106頁，1980年12月出版[2] C. Nakaya等著，IEEE超音波專業座談會，1985年十月1618日。P634[3] S. D. Darrah等著，《大面積壓電復合材料》關于活性物質和構造的ADPA會議，亞歷山德里亞，十一月48日，1991年，埃德。灣諾爾斯，物理研究所出版，頁139142 。[4] A. Safari and D. J. Waller著，《精密尺度的煙點陶瓷纖維/聚合物復合材料》，在關于活性物質和構造的ADPA會議上提交，亞里山德里亞，危吉利亞，十一月48號，1991年。[5] U. Bast, D. Cramer and A. Wolff著，《一種用來制造13連通形壓電復合材料的新方法》，第七屆CIMTEC ， 意大利蒙特卡蒂尼， 6月24至30號， 1990年，. Vincenzini, Elsevier，20052015頁[6] G. Bandyopadhyay and K. W. French著，《網狀的硅的氮化物應用于發動機的制造》，對渦輪增壓器轉自及動力，108，536539頁，1986年出版[7] J. Greim等著，《燒結注塑渦輪增壓轉子》，第三屆關于熱動力的陶瓷材料及構造國際研討，內華達州拉斯維加斯，13651375頁，Amer. Cer. Soc，1989年 附件2：外文原文FABRICATION OF PIEZOELECTRIC CERAMlClPOLYMER COMPOSITES BY INJECTION MOLDING.Leslie J. Bowen and Kenneth W. French,Materials Systems Inc.53 Hillcrest Road, Concord, MA 01742AbstractResearch at the Materials Research Laboratory, Pennsylvania State University has demonstrated the potential for improving hydrophone performance using piezoelectric ceramic/polymer posites. As part of an ONRfunded initiative to develop costeffective manufacturing technology for these posites, Materials Systems is pursuing an injection molding ceramic fabrication approach. This paper briefly overviews key features of the ceramic injection molding process, then describes the approach and methodology being used to fabricate PZT ceramic/polymer posites. Properties and applications of injection molded PZT ceramics are pared with conventionally processed material.IntroductionPiezoelectric ceramic/polymer posites offer design versatility and performance advantages over both single phase ceramic and polymer piezoelectric materials in both sensing and actuating applications. These posites have found use in high resolution medical ultrasound as well as developmental Navy applications. Many posite configurations have been constructed and evaluated on a laboratory scale over the past thirteen years. One of the most successful binations, designated 13 posite in Newnham’s notation [l 1, has a onedimensionally connected ceramic phase (PZT fibers) contained within a threedimensionally connected organic polymer phase. Hydrophone figures of merit for this posite can be made over 10,000 times greater than those of solid PZT ceramic by appropriately selecting the phase characteristics and posite structure.The Penn State posites were fabricated [ l ] by handaligning extruded PZT ceramic rods in a jig and encapsulating in epoxy resin, followed by slicing to the appropriate thickness and poling the ceramic. Aside from demonstrating the performance advantages of this material, the Penn State work highlighted the difficulties involved in fabricating 13 posites on a large scale, or even for prototype purposes. These are:1) The requirement to align and support large numbers of PZT fibers during encapsulation by the polymer.2) The high incidence of dielectric breakdown during poling arising from the significant probability of encountering one or more defective fibers in a typical large array. Over the past five years several attempts have been made to simplify the assembly process for 13 transducers with the intention of improving manufacturing viability and lowering the material cost. Early attempts involved dicing solid b
醫療健康相關推薦
鄂ICP備17016276號-1