【正文】 25045的通訊地址，當電能達到 1 度時。 16 位液晶顯示屏顯示的時間，并反過來顯示電能信息。 本科學生畢業設計 （論文）附件 附件 C：譯文 C6 圖 4。主程序流程圖 五 .測試結果 測量誤差和運行測試已在淄博億電子有限公司取得。 epigenous 計算機完成時間的管理和設置。這里有三種費率的時間段。第一階段的時間是低峰期從 00 點 00分鐘到 06 點 30 分鐘。時間的第二個時期是用電高峰期從 06 點 30 分鐘到 22 點30 分鐘。第三階段的時間是正常用電時期從 22 點 30 分鐘到 24 點 00 分鐘。設置各個時間的用電效率并發送到計算機管理系統，電力公司根據國家政策調整并保存到 X25045。用電高峰期，正常用電，用電低峰期，每月電力總讀數保存在電能表，并通過單元控制器發送到 epigenous 計算機。通訊波特率是 9600 比特每秒。 級標準的電子式電能表是 標準的校驗表并且是多費率電能表的測試儀表。淄博億電子公司根據不同的負荷運行已進行了測試。在 30kW 的負荷下測量的數據見表 1。 本科學生畢業設計 （論文）附件 附件 C：譯文 C7 表一比較普通電能表和多費率電能表 測試結果表明，該復費率電度表誤差小于 1％，屬于 級。反復讀數電能精度和校正的時間是及時和正確的。通過測試，對降低用電計量誤差的方法可以得到。第一，調整 AD7752 采樣電阻的準確值。其次，需要這個電阻值隨溫度變化的較少。第三，在電力計量的過程中，當電力尾數部分不足 ，其余的脈 沖應該在一起訪問，從而累積誤差不足 度，能量損失是可以避免的。 六 .結論和展望 多費率電能表在不同的時間根據不同的設置完成電能計算。它采用 485 串行通信，實現自動抄表和實時校正。淄博億電子公司生產的結果表明，在本文的多速率三相電度表有新穎的設計技術，精確測量的特點，靈活的時間設置。各項技術指標達到國家智能卡電能表的技術標準。因此，它具有廣泛的應用前景。 譯文原文出處 ： Jishun Jiang 。 Lanlan Yu 。 Sch. of Electr. amp。 Electron. Eng., Shandong Univ. of Technol., Zibo, China . Design of a New ThreePhase MultiRate WattHour Meter Based on Singlechip . Computational Intelligence and Software Engineering, 2020. CiSE 2020. International Conference on . 本科學生畢業設計 （論文）附件 附件 C：譯文 C8 參考文獻： [1] Bu Zhengliang, Yin Xianggen, Tu Guangyu. “Development of HV Watthour meter.” Automation of Electric Power Systems, 2020, 30(19): 8993. [2] Kosukegawa M., Sakumoto Y. “Traceability system of electric energy standard and tendency in static watthour meter development in Japan.” Sixth International Conference on Metering Apparatus and Tariffs for Electricity Supply, 1990,4: 259263. [3] Xuehai Li. Applied tutorial of singlechip. Electronic industry publishing pany, 2020. [4] AlKhateeb Tarik, Blundel Martin. “An electronic meter for measuring the saving in electrical power.” The Ninth Arab International Conference on Solar Energy (AICSE9), Kingdom of Bahrain, 2020,4 (209):328333. [5] Liu Ying, Liu Qingyu. “Development of a selfcalibration precision electrical measuring meter.” Proceedings of the 1998 Conference Precision Electromagic Measurements, 1998,7:276. [6] Gao YunPeng, Teng ZhaoSheng, Liu Peng. “Design of threephase multifunctional harmonic energy meter.” Journal of Hunan University Natural Sciences, 2020, 35(9): 5357. [7] Qu Qingchang. “Key technology to threephase electric meter and high voltage electric power measurement.” Acta Metrologica Sinica, 2020, vol28: 2530. 本科學生畢業設計 （論文）附件 附件 C：譯文 C9 英文原文： Design of a New Threephase Multirate Watthour Meter Based on singlechip Jishun Jiang School of Electric and Electronic Engineering Shandong University of Technology Zibo, 255091, China Lanlan Yu School of Electric and Electronic Engineering Shandong University of Technology Zibo, 255091, China Abstract With the development of the society, the demand of electric power bees bigger and bigger. The phenomenon of unbalanced electricity in different time is worse and worse. In order to adjust electric power burthen with reason and save energy, we put forward the design of a novel multirate threephase watthour meter. The design principle of a novel multirate threephase watthour meter based on AT89LV5 is proposed in this paper. The designs of hardware and software flow, as well as the analysis of experiment data are presented in detail. By trial manufacturing in Zibo Billion Electron Limited Company, it demonstrates that this multirate threephase watthour meter has the characteristics which are walking precision, accurate measurement, automatic meter reading, flexible time period setting and low cost. Therefore, this novel multirate watthour meter has a broad application prospect. Keywordsmultirate, threephase watthour meter,AT89LV52 I. INTRODUCTION The development and application of puter technology push the construction of intellectualized section exteriorly. Because the phenomena of bigger demand of electric power and unbalanced electricity in different time is worse and worse, electric power pany has encouraged people to use multirate watthour meter [1] in order to adjust electric power burthen with reason and save energy. The traditional multirate watthour meter 本科學生畢業設計 （論文）附件 附件 C：譯文 C10 always adopts mechanical tinplate to measure. There are some shortings that the measurement precision falls with machine abrasion, single time period setting and strong manpower [2]. In this paper, we propose a novel mul