【正文】 f the application. The certification body piles and issues the Product description report template according to regulated contents and format. Contents of the report should be clear and integrated.The certification body should provide the Type testing report and Product description report to the applicant in time. The certification holder should assure the valid and integrated reports can be acquired in the factory. Initial inspection of the factory Contents of the inspection The contents of factory inspection shall include the assessment of factory quality assurance ability and product consistency checking. Assessment of factory quality assurance ability. The inspector assigned by the certification body shall carry out the factory quality assurance ability assessment according to the Requirements for Factory Quality Assurance Ability (see Appendix V) and supplementary assessment requirements regulated by CNCA. In the meantime, the inspector shall carry out checking according to Testing Requirements of Factory Quality Control of Compulsory Certification of Audioamp。 testing after certified If necessary, the certified products should be sampled and tested. The samples shall be taken randomly from the qualified products of the factory (including those from the product line, the stock, and the market/sales agency). For the same category of product, only one sample is needed to be taken.The designated testing bodies shall plete the testing for the samples in 20 working days. The methods and requirements for sampling shall be carried out according to the relevant specifications of the certification body. The test items specified in the standards for certification type testing can be applied to surveillance testing, the certification body may carry out parts of or all of the test items, based on the degree of effects on the safety and/or EMC performances of products. Evaluation of followup surveillance resultsThe certificates can be retained and the certification marks can be continuously used upon qualified surveillance results. If results are unqualified, clause is applied. Followup investigation by certification bodyThe certification body shall conduct effective followup investigation with the certificated product according to the requirements in the Regulations of the People’s Republic of China on Certification and Accreditation, and disposal of the certificate status properly according to the results of followup surveillance.5. Certificate Retaining of certificate The validity of the certificate The validity of the certificate is retained depending on the certification body’s followup surveillance. When the requirements of the implementation rules (such as the standards) are changed, the certificate should be revised in regulated periods, otherwise the certificate is invalidated automatically. Change of the certified product Applying for change of certified productShould any change occurs in the specification, type/model and the manufacturer of the ponents listed in Appendix II or Appendix III of the certified products, or the design of electric construction involved in safety or EMC of the appliances, or other aspects stipulated by the certification body, the application for approving/recording the change shall be made to the certification body. Evaluation and approval of changeThe certification body shall evaluate the change according to the submitted information and confirm whether it can be approved or samples should be submitted for tests. If test is necessary, the change will be approved upon qualified test results. The original certificated product for the type testing should be the foundation for the evaluation of change in principle. Extension of the scope of certified products Procedure for extension For extension of the range of products covered by the scope of certified products, the certificate holder should make application firstly. The certification body shall check the consistency of the extended products against the certified products and confirm the applicability of the original certification results to the extended products together with the validity of the standards version. Supplementary test or inspection will be conducted focusing on the differences. Separate certificate or revised certificate will be issued to the certificate holder depending upon their requests. The original certified product for the type testing should be the foundation for the extension in principle. The requirements for sampleThe certificate holder shall submit the technical documents related to the extended products and submit the sample for checking by the certification body according to the requirements of Clause of this Rules. If testing is required, the testing items will be determined by the certification body. Suspension, cancellation and withdrawal of the certificateThe suspension, cancellation and withdrawal of the certificate shall follow the Regulations for Compulsory Product Certification and relative regulations of the certification body.The certification body will suspend the certificate if the certificate holder couldn’t accept the followup inspection and/or followup sampling and testing.The certification body will withdraw the certificate if the certificate holder reject to the followup inspection and/or followup sampling and testing.The certificate holder can apply for the suspension and cancellation of the certificate. The certification body should suspend or cancel the certificate upon the holder’s request.When the certificate is suspended for acceptable reasons such as the stop of production, etc., the suspension period can’t exceed 12 months. If the suspended certificate is not resumed after 12 months, it’ll be cancelled by the certification body. The certificate holder should apply for the certificate’s resuming to the certification body. The certification bo