【正文】
line protocol is down Hardware is PowerQUICC Serial Internet address is MTU 1500 bytes, BW 2000000 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation HDLC, loopback not set測試PC1/PC2連通狀態Command: pingPinging with 32 bytes of data:Request timed out.Request timed out.Request timed out.Request timed out.Ping statistics for :Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), 2. 配置無驗證的PPP協議,測試PCA和PCB之間的連通性,填寫表2。配置完成后在串口上要shutdown接口后再no shutdown(Cisco命令)/ undo shutdown(Quidway命令)使之生效后才能檢測是否配置正確。表3實驗步驟觀察內容顯示路由器的串口狀態Command: show interface s0/0或:display interface s0/0Serial0/0 is up, line protocol is up Hardware is PowerQUICC Serial Internet address is MTU 1500 bytes, BW 2000000 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set測試PC1/PC2連通狀態Command: pingPinging with 32 bytes of data:Request timed out.Request timed out.Request timed out.Request timed out.Ping statistics for :Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),4. 配置采用CHAP驗證的PPP協議,CHAP驗證是雙向驗證,是密文驗證。主驗證方配置:a) 配置本地驗證對端(方式為CHAP)ppp authenticationmode ch