【正文】 ipline, disciplinary regulations repeat and Criminal law and other laws and regulations repeat。s eighteen years prehensive strictly practice. (a) revised two regulations of the party need of the ICAC guidelines in in 1997 Leaders as members of the Communist Party of China clean politics certain criteria (Trial) based on revised, the promulgation and implementation of January 2010, to strengthen the construction of the contingent of leading cadres play an important role. But with the party to manage the party strictly administering the deepening, has not been able to fully meet the actual needs. Content is too plicated, eight prohibition, 52 are not allowed to hard to remember, and also difficult to put into practice。s leadership, to solve the masses of the people reflect a focus on the problem. The new revision of the code and rule , reflects the party39。 the fourth part on how to grasp the implementation of the two regulations of the party. code and Regulations revised the necessity and revised history of the CPC Central Committee the amendment to the Chinese Communist Party members and leading cadres honest politics several guidelines and Chinese Communist Party discipline and Punishment Regulations column 1 by 2015 to strengthen party laws and regulations focus. Two party regulations revision work lasted a Years, pooling the wisdom of the whole party, ideological consensus, draw historical experience, respect for the wisdom of our predecessors, which reflects the unity of inheritance and innovation。 the second part is the interpretation of the two fundamental principles of the revision of laws and regulations in the party。，應填寫分項工程名稱欄，其它技術交底可不填寫（英文版 ） Two regulations promulgated for implementation is in the party in power for a long time and the rule of law conditions, the implementation of prehensive strictly strategic plan, implementation in accordance with the rules and discipline to manage the party, strengthen innerparty supervision of major initiatives. The two regulations supporting each other, the code adhere to a positive advocate, focusing on morality is of Party members and Party leading cadres can see, enough to get a high standard。十一、 自檢報驗與抹灰封堵施工完成后，填寫質量驗收表與交接檢表并報項目機電部驗收，由各區域工長會同業主方、監理單位驗收，驗收合格后通知土建專業進行封堵、抹灰。實 測 項 目要 求允 許 偏 差 (mm)盒、箱水平、垂直位置正 確10（磚墻）盒箱1m內相鄰標高一 致2盒子固定垂 直2箱子固定垂 直3盒、箱口與墻面平 齊最大凹進深度10mm九、 定位復合 固定完成后再次用上述定位線盒方法復合線盒水平尺寸及標高，確保定位無誤。穩住盒、箱要求發漿飽滿，平整牢固，坐標正確。八、 綁扎固定線盒固定前應復合標高與水平尺寸。JDG管連接、JDG管進盒（箱）均應采用專用接頭。具體見PVC管施工技術交底（編號：A018）。 PVC塑料管。根據“錢江杯”審查要點要求，直徑在50mm以下鋼管進箱、盒、管口時，內外必須采用鎖緊螺母鎖緊，絲扣露出3—5mm，不能出現絕絲及絲扣超長現象；管口應光滑平整無毛刺。鍍鋅鋼管采用專用接地卡子跨接地線，導線用4mm178。必須采用套絲連接．不得采用套管焊接。軟線與配電箱內接地排可靠電氣連接。焊接鋼管與線盒間采用￠6圓鋼焊接兩處，焊接倍數為6d，雙面滿焊，焊接符合焊接要求，焊后及時清除凈焊藥焊渣。管與管采用套管熔焊連接；套管長度為 ；套管焊接處要嚴密、整齊，不得漏焊、有縫隙；焊接連接后管與管之間可不做跨接地線。進入燈頭盒、開關盒的線管數量不宜超過４根，否則應選用大型盒； 兩根以上配管并排進入箱盒，間距要均勻，排列整齊一致；管進入箱 盒時，盒內外側應裝有鎖緊螺母固定；進入落地式配電箱柜的管線，排列應整齊，管口宜高出基礎地面 50～80mm。對配電盤、箱的開孔還得注意與二次板的間距，開在靠配電箱后部。管子應至少有 15mm 保護層。配管不得出現半明半暗現象。切割完成后剔槽時應注意用力度要適當，鏨子成斜狀由上向下剔，以免破壞砌體結構。采用云石機沿線切割。并且現場同一區間內的點位標高均應以同一處固定標高控制點作為參考進行復核，以確保標高無誤。坐標線應選用不同的兩根軸線對同一坐標進行復核，以確保坐標無誤。按施工圖紙的要求和施工規范的規定（或?qū)嶋H要求），經過綜合考慮，確定盒（箱）的正確位置，及管路的敷設部位和走向、進出盒（箱）的位置。四、 路由優化根據圖紙要求，適當對圖紙進行優化，盡量減少轉彎，方便后期穿線。切斷管路使用砂輪鋸或鋼鋸，注意鋸出的管口應平齊、不得有斜口，鋸斷后應用圓銼清除毛刺。 鋼管彎曲。槽鋼焊四根象板凳一樣高40公分腿。管道防腐前做去銹處理，外壁涂覆防銹底漆兩遍。 塑料管及其附件應具有阻燃、耐沖擊的要求，其氧指數應大于 27%。技術交底記錄編號A024工程名稱義烏世貿中心交底日期施工單位中建一局分項工程名稱二次墻體配管交底提要二次墻體配管施工交底交底內容交底內容：一、 施工依據建筑電氣工程質量驗收規范GB503032002錢江杯驗收規范二、 材料要求 鋼管應壁厚均勻，焊縫均勻無毛刺，無劈裂、砂眼、棱刺和凹扁現象。 鍍鋅鋼管應采用熱鍍鋅，內外鍍層良好、均勻，無表皮剝落、銹蝕現象。三、 工藝流程 焊接鋼管防腐。內壁防腐具體做法：在進廠鋼管檢查合格后把鋼管放在3040℃的一邊槽鋼一邊架子上。管底部放在槽鋼內，由鋼管上部灌漆，邊灌邊轉，保證管內漆均勻。根據放線及剔槽走向需求，將線管煨彎出所需要的形狀。鋼管暗配管彎曲半徑不應小于管外徑的 10 倍, 倍。施工前不僅要熟悉電氣施工圖，還要熟悉建筑和結構施工圖。五、 測量定位燈具、開關、插座線盒水平定位以土建測放的墻（柱）的定位線或控制線為基準線，測量出預埋線盒水平坐標并做好標記。預埋線盒標高定位采用土建測放的建筑1米線為基準線，使用水平儀器或紅外線將各個預埋線盒的高度定位準確。六、 開槽剔槽首先與土建溝通，待二次砌筑墻體的強度達標以后，根據預埋線盒位置以及優化以后路由，在墻體上繪出以最優管線布置線。開槽深度為管直徑+，寬度為管直徑+，如是多根并排敷設，寬度為n（根數）（管直徑+ ）+。七、 管路敷設暗配管當配管長度超過以下長度時要加接線盒，無彎時 30m，有一個時 20m，有兩個彎時 15m，有三個彎時 8m，不允許有四個彎。埋入墻或地面的管子應盡量減少重疊高度，不能超過 3 層。管入盒（箱）時，開孔應整齊并與管徑一致，要求一管一孔，不得開長孔。鐵制箱盒嚴禁用電氣焊開孔，管口露出箱盒應小于 5mm，有鎖母者與鎖 緊螺母平，露出 2～3 扣。 焊接鋼管。根據“錢江杯”審查要點要求，直徑在50mm以下鋼管進箱、盒、管口時，內外必須采用鎖緊螺母鎖緊，絲扣露出3—5mm，不能出現絕絲及絲扣超長現象；管口應光滑平整無毛刺。焊接鋼管進箱處，在焊管處焊接可靠接地端子，用4mm178。 熱鍍鋅鋼管。套絲連接要用通絲管箍，套絲不亂扣，管口要對嚴，連接后外露螺紋 2～3 扣。的銅芯軟線，接頭須搪錫，接觸應良好。絲扣連接后必須做跨接地線。塑料管應采用插入法連接，連接處結合面應涂專用膠粘劑，～3 倍，插入深度直宜為管外徑的 ～ 倍。 JDG管。具體見JDG管暗敷技術交底（編號：A008）。剔槽敷設的管路每隔1m應鐵釘、鐵絲綁扎牢固，可用纖絲環繞線管綁扎通過釘子與加氣塊固定或其他合理方式固定。盒、。十、 工完場清每次收工后，將剩余材料清理干凈，將剔槽出的加氣塊碎塊等垃圾及時清理干凈并運至指定垃圾堆放地點。審核人交底人接受交底人，交底單位與接受交底單位各存一份。 rule around the party discipline, disciplinary ruler requirements, listed as negative list, focusing on vertical gauge, draw the party organizations and Party members do not touch the bottom line . Here, the main from four square face two party rules of interpretation: the first part introduces two party Revised regulations the necessity and the revision process。 the third part introduces two party regulations modified the main changes and needs to grasp several key problems。 follow the correct direction, grasp the limited goals, adhere to the party39。s 18 and the eighth session of the third, the spirit of the fourth plenary session, reflecting the experience of studying and implementing the General Secretary Xi Jinping series of important speech, reflects the party39。 the second is concisely positive advocated by the lack of prohibited provisions excessive, no autonomy requirements。 the fourth is to clean the theme is not prominent, not for the existing problems, and is narrow, only needle of countylevel leading cadres above. rule is in 1997 Chinese Communist Party disciplinary cases (Trial) based on revision, in December 2003 the promulgation and implementation, to strengthen the construction of the party play very important role. Along with the development of the situation, which many provisions have been unable to f