【正文】 誤 !未定義書簽。 Liquid level。若要退出系統，只需點擊窗口右下 方的退出就會退出運行系統。并且在主界面中也能直接觀察實時曲線，查看系統的穩定情況。當我們啟動系統后進入主界面我們首 先在手動狀態下按動啟動按鈕，然后水罐 1 和水罐 2中的水位能根據“水泵”和“出水閥”的開閉狀況自動合理變化，待系統穩定后，手動調節出水閥，系統再次自動合理變化。主界面中有二個儲藏罐，它們在本設計中只是作為容器。為從事計算機控制方面的工作打下一定基礎。 成績 課 程 設 計 報 告 設計題目 雙容水箱液位監控系統 課程名稱 工控系統監控程序設計 《 工控系統監控程序設計 》課程設計報告 I 雙容水箱液位監控系統組態設計 摘 要 本課程設計運用工業監控系統組態軟件（ MCGS），結合一個自動控制系統，完成該控制系統的上位機監控系統組態設計。使學生掌握監控軟件的設計和編程方法，得到計算機監控系統程序設計與調試，以及編寫設計技術文件的初步訓練。本課程設計要求運用工業監控系統組態軟件（ MCGS），結合一個雙容水箱液位監控系統，完成該控制系統的上位機監控系統組態設計。在主界面中還有二個調節閥和一個水泵，二個調節閥門分別是控制兩水罐液位和用戶用水，水泵控制水罐 1 液位。期間畫面也能顯示出水罐 1 和水罐 2 液位變化的數值，并且管道也能模擬液體的流動。當我們要觀察歷史數據、歷史曲線和報警信息時 ，只需點擊窗口左上方對應窗口即可。 關鍵詞： 雙容水箱；液位； 水罐； 報警雙容水箱液位監控系統 II Double let water tank liquid level monitoring system configuration design Abstract This course design using industrial monitoring and control system configuration software (MCGS), bining with an automatic control system, plete the PC monitoring system configuration of the control system design. Enable students to master the design of monitoring software and programming method of puter monitoring and control system programming and debugging, technical documents and write design of initial training. To work in the puter control to lay a certain foundation. This course design requires use of industrial monitoring system configuration software (MCGS), bined with a double let water tank liquid level monitoring system, plete the PC monitoring system configuration of the control system design. The main screen has two tanks, they just as a container in this design. In the main interface as well as two regulating valve and a water pump, two regulating valves are respectively two water tank liquid level and user control, water pump control water tank liquid level 1. When we start the system last in capturing the interface we first in manual state, press the start button, and then water tank 1 and the water level in tank 2 can according to the water pump and water reasonable change of automatic open and close condition of the stay system stabilized, manually adjust the water valve, reasonable system again automatically change. During the screen can show the water tank 1 and 2 level changes of numerical POTS, and can simulate the flow of the liquid pipe. And in the main interface ca n be directly observed in real time curve, check the system stability. When we watch the historical data, historical curve and alarm information, just click the upper left window corresponding to the window. If you want to exit the