【正文】 s view operation to check the status of each program. /usr/DynamicLinkManager/bin/dlnkmgr view sysHDLM Version : xxxx分行 IT基礎設施資源整合－技術組件項目文檔17Service Pack Version :Load Balance : on(rr)Support Cluster :Elog Level : 3Elog File Size (KB) : 9900Number Of Elog Files : 2Trace Level : 0Trace File Size(KB) : 1000Number Of Trace Files : 4Path Health Checking : on(30)Auto Failback : offIntermittent Error Monitor : offHDLM Manager Ver WakeupTimeAlive xxxx yyyy/mm/dd hh:mm:ssHDLM Alert Driver Ver WakeupTime ElogMem SizeAlive xxxx yyyy/mm/dd hh:mm:ss 4000HDLM Driver Ver WakeupTimeAlive xxxx yyyy/mm/dd hh:mm:ssLicense Type ExpirationPermanent KAPL01001I The HDLM mand pleted normally. Operation name = view, pletion time = yyyy/mm/dd hh:mm:ss? Check for the HDLM device for the SCSI device. /usr/DynamicLinkManager/bin/dlnkmgr view –drv根據需要設置如下參數? Set up the HDLM reservation levels /usr/DynamicLinkManager/bin/dlnkmgr set rsv on 0? 修改 Auto Failback（路徑自動回復）參數的設置 /usr/DynamicLinkManager/bin/dlnkmgr set afb on分行 IT基礎設施資源整合－技術組件項目文檔18 HDLM SP02補丁 (1) Log in to AIX as a user with root permissions. (2) Execute the following mand to make sure the level of the file set. When is installed lslpp la Fileset Level State Description Path: /usr/lib/objrepos COMMITTED Dynamic Link Manager Path: /etc/objrepos COMMITTED Dynamic Link Manager When is installed lslpp la Fileset Level State Description Path: /usr/lib/objrepos COMMITTED Dynamic Link Manager Path: /etc/objrepos COMMITTED Dynamic Link Manager When is installed lslpp la Fileset Level State Description Path: /usr/lib/objrepos COMMITTED Dynamic Link Manager COMMITTED Dynamic Link Manager Path: /etc/objrepos COMMITTED Dynamic Link Manager (3) Execute the following mand to unmount the file system used by HDLM. unmount filesystemmountpoint (4) Execute the following mand to display all the activated volume groups. lsvg –o (5) Among the displayed volume groups, inactivate the volume groups used by HDLM. /usr/DynamicLinkManager/bin/dlmvaryoffvg volumegroupname (6) Execute the following utility to remove the HDLM device and the logical device file for the HDLM alert driver from the running kernel, and then stop the HDLM manager: /usr/DynamicLinkManager/bin/dlmrmdev If the KAPL09012I message is displayed, there is no problem. If the KAPL09012I message is not displayed, the logical device file for the HDLM alert driver or the HDLM device has not been deleted, or the HDLM manager has not stopped. Make sure that no processes, services, file systems, or volume groups are using any HDLM managementtarget path, and then reexecute the above utility.分行 IT基礎設施資源整合－技術組件項目文檔19 (7) Execute the following installation mand. When installing Service Pack, use the acXgd parameter instead of aXgd. installp acXgd directorywhichcopiedinstallationfile all (8) Execute the following mand to make sure the level of the file set is renewed. When was installed lslpp la Fileset Level State Description Path: /usr/lib/objrepos COMMITTED Dynamic Link Manager COMMITTED Dynamic Link Manager Path: /etc/objrepos COMMITTED Dynamic Link Manager When was installed lslpp la Fileset Level State Description Path: /usr/lib/objrepos COMMITTED Dynamic Link Manager COMMITTED Dynamic Link Manager Path: /etc/objrepos COMMITTED Dynamic Link Manager When is installed lslpp la Fileset Level State Description Path: /usr/lib/objrepos COMMITTED Dynamic Link Manager COMMITTED Dynamic Link Manager COMMITTED Dynamic Link Manager Path: /etc/objrepos COMMITTED Dynamic Link Manager Make sure that the fileset item in the output listing contains , and all the statuses displayed are COMMITTED. (9) Execute the dlmcfgmgr utility to configure the HDLM devices. /usr/DynamicLinkManager/bin/dlmcfgmgr (10) Execute the following mand to make sure that the HDLM drivers and HDLM alert driver are loaded into the running kernel and are available. lsdev C | grep dlm dlmadrv Available HDLM Alert Driv