【正文】 %FSMaximum measurement voltage: 32mv ()Internal resolution: 1/1,000,000Display resolution: 1/16,000Sampling speed: 100 times/secondDigital Block:Display element:Fluorescent display tube (Display color: Cobalt blue, Status display: orange)Main display section: 7segment 7digit, Character height: 13mmSubdisplay section: 7segment 8digit, Character height: 7mmStatus display: Up to 14 “” marks are displayedExternal Input / Output:Input: 6 pointsOutput:8 points FRONT PANELMAIIN DISPLY SECTIONA 7digit 7segment display. Displays the gross, net weight, etc.SUB DISPLAY SECTIONAn 8dight 7segment display. The display content can be selected using the “general function”.STATUS DISLAY SECTION (UPPER)The upper “”mark indicates the status of the weight value.[ZERO]Illuminated when the gross is located at the center of the zero point (center zero)[MD]Illuminated when the weight value is unstable. The montion condition can be changed using a “calibration related function”.[GROSS]Luminated when the displayed weight is the gross weight.[NET]Illuminated when the displayed weight is the net weight.[HOLD]Illuminated when the weight display is being held. Either normal hold or peak hold can be selected using the “general function”.[]This display capability can be changed depending on the application and using the “general function”.[ALARM]Illuminated in case of zero range error. Weighing capacity overflow. Or low battery.STATUS DISPLAY SECTION (LOWER)The lower””mark indicates a parison result.In the normal mode ,it is illuminated when a setpoint output of an identical name is turned on .In the setpoint setting mode ,the “”mark relevant to the value in the lower numerical display section blinks.Normal Batching[FINAL]Blinks while setting the final weightBormal batching –iuminated when the net weight is within a positive range[]Blinks while setting the free fallNormal batching—illuminated when the net weight is more then the final weight linus free fallBuiltinautomatic program mode—illuminated during dribble flow[PRELIM]Blinks while setting the preliminaryNormal batching—illuminated when the net weight is more than the final weight minus preliminaryBuiltinautomatic program mode—illuminated during medium flow[OP PLM]Blinks while setting the optional preliminaryNormal batching—illuminated when the net weight is more than the final weight minus optional preliminary. Builtinautomatic program mode—illuminated during full flow[OVER]Binks while setting the overlimit.Illuminated when the net weight is more than the final weight plus overlimit.[UNDER]Blinks while setting the underlimitIlluminated when the net weight is less than the final weight minus underlimit[ZERO BAND]Blinks while setting the zero bandIlluminated when the gross weight is less than the zero bandLossinweightAttach a label that has “OPTIONAL PRELIMINARY replaced by “FULL”[FULL]Blinks while setting the full weightIlluminated when the gross weight is more than the full weightCheck WeightingThe meaning of each “”mark differs pletely. Attach a different accessory lable.[]Illuminated when the gross weight is less than the zero band[LoLo]Blinks while setting the LoLoIlluminated when the parison result output, LoLo, is turned on[Lo]Blinks while setting the Lo limitIlluminated when the parison result output, Lo, is turned on[Go]Blinks while setting a reference valueIlluminated when the parison result output, Go, is turned on[Hi]Blinks while setting the Hi limitIlluminated when the parison result output, Hi, is turned on[HiHi]Blinks while setting the HiHi limitIlluminated when the parison result output, HiHi, is turned onKEY SWITCHES[CAL]The key used to enter the calibration mode. A cover is provided so that this key can not be operated if used in a certified mercical application. In order to prevent erroneous operation, attach and seal the cover.[SETPOINT]The key used to set a setpoint. If this ke pressed together with the [ENTER] key, you will enter the “general function” mode.[ZERO] ([])The key used for zeroing. A zeroing condition can be set with the “calibration related functions.”While inputting a number, this key is used to shift the blinking digit to the left.[TARE] ([])The key used to subtract the tare. The tare subtraction condition can be set with “calibration related functions.”While inputting a number, this key is used to shift the blinking digit to the right.[GROSS/NET]([^])The key used to switch the weight display from gross weight to net weight and vice versa. While inputting a number, pressing this key will increase the number of the blinking digit by one.[F] ([v])The capability of this key can be changeding on the application. The folloeing capabilities can be selected using the “general functions.” While inputting a number, pressing this key will decrease the number of the blinking digit by one.[ENTER]While inputting a number, pressing this key writes that number of the blinking digit by one.[OPR/STB] ([ESC]The key used to switch from the normal mode (ON state) to the standby mode (OFF state) and vice versa. Inthe standby mode, all displays and external input/outputs are turned off and a circle (O) appears in the unit display section. While inputting a number, this key serves as the [ESC] (Escape)REAR PANEL(a) Connects the thumbwheel switch or setpoint unit (OP05) to set a setpoint required for a weighting sequence(b) Inputs/outputs the signals such as tare subtraction input, each loading output required for the weighting sequence. The capability of each terminal can be changed freely(c) Provides an output for the standard serial interface (current loop)(d) One of the following options can be attachedOP01 BCD output,OP03: RS422/485 input/output,OP04 :RS232C input/output(e) Connects to the power sou