led檢驗標準-資料下載頁
2025-08-05 00:43本頁面
【正文】 to any painted and/or silkscreening surface for 3 cycles.(no any paint/coating/silkscreen printing should be found on the cloth).施加 2(+/)公斤砝碼,白布浸蘸 95%酒精,測試 3 次, 不允許任何脫落Nil 無4Scratch ResistanceTest抗劃花測試Use a sharpened H type pencil held atan angle of 45176。 with the force of 700177。200g and press the pencil tip into thesurface of the unit,move about five lines(at a speed of 10mm/s) on the area.Erase the pencil marks (no scratch marks or no damage should be found).用 H 型號鉛筆 45 度角負重 700177。200g 速度 10mm/s 劃 5 條線,不允許任何劃花Nil 無5Finger nail testScratch the testing area by finger nail 200Apply appropriate force to rub silkscreen指甲測試times by 1Kg weight force,10NNo print50 times.removable is allowedNot allow any peel off用 1KG 的重量 10N 的力度在樣品的測施加適當力度搓揉 50 次；試區域用指甲刮擦 200 次，要求印刷不不允許絲印脫落能掉 of Painting 噴油測試Test Item 測試項目Test Condition 測試條件Acceptance Criteria 接受標準Class I。 Outdoor。 I 類；室外產品Acceptance Criteria 接受標準Class II。 Indoor。 II 類；室內產品1Alcohol test酒精測試* Apply the weight of 500 g*Add 95% alcohol regularly to keep whitecloth wet* Test 200 cycles (40 cycles/min)* Not allow any peel off施加 500 克砝碼,白布浸蘸 95%酒精,測試 200 循環次數（速度 40 循環/分鐘）,不允許任何脫落* Apply the weight of 200 g*Add 95% alcohol regularly to keepwhite cloth wet* Test 200 cycles (40 cycles/min)* Not allow any peel off施加 200 克砝碼,白布浸蘸 95%酒,測試 200 循環次數（速度 40 循環/分鐘）,不允許任何脫落2Abrasion Resistance Test抗摩擦測試Use a cotton cloth with 95% IsopropylAlcohol to rub this cloth (with a force of 2(+/)onto any painted and/or silkscreening surface for 3 cycles.(no any paint/coating/silkscreen printing should be found on the cloth).施加 2(+/)公斤砝碼,白布浸蘸 95%酒精,測試 3 次, 不允許任何脫落Nil 無3XCUTTING(Adhension)百格測試With nicking tool 10mm*10mm to nick 100 small cells 1*1mm.Paste 3M600 tape on this cells area, and flat it by hand.And then pull the tape vertically and quickly.Repeat step 1,2,3 for 3 times.Check it, 2/3 area of one cell paint peel off allowed. Otherwise, this test passed.刻刀介 10mm*10mm 為 100 個 1*1mm小格，3M600 膠紙用手壓貼，垂直快速拉起，重復以上 3 次，檢查 2/3 小格脫落為合格Nil 無4Scratch ResistanceTest抗劃花測試Use a sharpened H type pencil held atan angle of 45176。 with the force of 700177。200g and press the pencil tip into thesurface of the unit,move about five lines(at a speed of 10mm/s) on the area.Erase the pencil marks (no scratch marks or no damage should be found).用 H 型號鉛筆 45 度角負重 700177。200g 速度 10mm/s 劃 5 條線,不允許任何劃花Nil 無8. Reference Documents/參考文件 《利佳公司產品通用外觀標準》 《產品可靠性試驗規程》Remarks: For any matters not described in this document shall be reference to the product specification, BOM, drawing ect. .備注：本文件如有未盡描述之事項請參考產品規格書，物料清單，圖紙及QA檢驗工作指引等。 End
公司管理相關推薦
鄂ICP備17016276號-1