【文章內容簡介】 使用單位共同確定設備日保的內容及標準。 Content and Standard of Daily Maintenance for equipment should be confirmed by Production Techenical Center and related department accroding to the standard form of “Equipment Daily Maintenance Form”. 、作業中及作業后，應依《設備日常保養檢修表》逐項檢查，并予記錄。發現異常立刻通知使用單位的設備管理員進行處理，使用單位確實無法處理的，填寫《設備請修單》，送交生技課處理。 “Equipment Daily Maintenance Form” should be filled up before, during, and after the every operation by equi pment operators from related department. Any abnormal of equipment should be noticed to people from equipment management center. For those problem cannot solved, “Equipment Repair Request Form” should be filled up and sent to Production Techenical Center for repair. C. 每月月初，各單位匯集《檢修表》，經主管確認后，并于每月的 7 日前送生技課確認后歸檔。 “Inspection Form” should be collected by each department and confirmed by Department Manager at the beginning of each month, and should be filed in Production Techenical Center at the time before 7 th of each month. D. 生技課技術員對《設備日常保養檢修表》實行不定期的稽查，以確保日常保養確實執行， 各設備必須至少每半個月稽查一次 。 Techenicians from Production Techenical Center should conduct irregular inspection for “Equipment Daily Inspection Form”, to ensure the implementation of routine maintenance. Irregular inspection should be done at least half month a time for each equipment. E. 稽查到不良內容均記錄于《設備日常保養檢修表》中的異常記錄中，并經使用單位設備員確認后，加以改善。 Any defects found during the irregular inspection should be recorded into abnormal record column of “ Equipment Daily Maintenance Form” . Defects should be repaired after confirmed by Equipment operators. 設備定期保養：生技課為各設備定期保養的負責單位 Equipment Regular Maintenance: Production Techenical Center is responsible for the regular maintenance of each equipment. 12 月 20 日之前做好《設備年度定期預防保養檢修計劃表》 ,并依 《保養計劃》進行設備的保養工作；在保養時，應仔細檢查設備各系統的可靠性并維護之，并把保養狀況記入《設備定期保養檢修表》中； 保養完成后，應在《設備履歷表》上作好相應的保養記錄和問題點記錄。 “ Equipment Annual Maintenance Schedule” should be made at the time before of each year by Production Techenical Center, which will conduct maintenance work accroding to this schedule. Maintenance should be well conducted and status should be well recorded into “ Equipment Regular Maintenance Form” . Related Maintenance Records and Problems should also be well recorded in “ Equipment Information Form” . 條件限制無法完成保養的，應報備生技課長，經課長審核，報備經理、總經理，核準后，可申請外修，但須填寫 《物品放行單》 。 Any problems that cannot be solved by the pany, could be applied for repaired outside the pany after confirmed by Production and Techenical Manager, Department Manager and General Manager. “ Item Released Form” is needed for repaired outside the pany. 設備保養等級之區分 Equipment Maintenance Level ：是為求達到保養作業的經濟性與有效性，固將機械設備分級，把不同等級之設備給予不同程度之保養。 Equipment Maintenance Level: To achieve the economic and effectiveness of the maintenance operation, machinery and equipment will be solid grade, the different levels of equipment to varying degrees of maintenance. 保養等級之區分如下： Maintenance Level are as follows: 區分 Distinction NO 項目 Item 評定內容 Audition Content 生 產 上 For Production 1 運行時間 Operation Hours 180H/ 月以上： 5 分 160H/ 月以上： 4 分 140H/ 月以上： 2 分 2 故障對生產的影響程度 Extent of impact for Production on the basis of defects 可影響至其他 部 門 ： 5分 有相當之影響： 4 分 僅本機停止： 1 分 3 故障對產品品質的影響