【文章內容簡介】
itchA為主交換機,并使能CSS功能[SwitchA] set css id 1 設置SWA的機框ID號為1(默認為1,不用配置) [SwitchA] set css priority 255 配置SwitchA的堆疊機框優先級為255Info: CSS config has been changed, need reboot to take effect.[SwitchA]css enable Reboot needed to change CSS config. Are you sure this operation and reboot now? [Y/N]y 2. 配置SwitchB的堆疊機框ID為2,并使能CSS功能。進入到另一臺9312上,把另一臺交換的ID設置為2 [SwitchB]set css id 2 設置SWB的機框ID號為2[SwitchA] set css priority 1 堆疊機框優先級為1,不用配置Warning: Modifying the CSS frame ID will cause interface configuration loss, are you sure this operation? [Y/N]yInfo: CSS config has been changed, need reboot to take effect(CSS should be enabled).[SwitchB]css enable[SwitchB]reboot Info: The system is now paring the configuration, please wait.System will reboot! Continue?[Y/N]:y檢查配置后的結果 查詢堆疊機框ID為1的交換機的堆疊狀態SwitchA dis css status frame 1Property Item Property ValueFrame ID 1Priority 255Enable switch OnCSS master force OffCSS status master 查詢堆疊機框ID為2的交換機的堆疊狀態SwitchA dis css status frame 2Property Item Property ValueFrame ID 2Priority 1Enable switch OnCSS master force OffCSS status backup查看集群板卡是否應用成功:正常情況是2臺集群交換機成為一機,而在端口的編號上來說是,每個端口前都加上了機框的ID號,如下所示:Quidwaydisp cur!Software Version V100R003C00SPC200 sysname Quidway vlan batch 1 18……interface Vlanif18 ip address interface Ethernet0/0/0/0interface GigabitEthernet1/1/0/0interface GigabitEthernet1/1/0/1interface GigabitEthernet1/1/0/2interface GigabitEthernet1/1/0/3interface GigabitEthernet1/1/0/4interface GigabitEthernet2/1/0/0 interface GigabitEthernet2/1/0/1interface GigabitEthernet2/1/0/2interface GigabitEthernet2/1/0/3interface GigabitEthernet2/1/0/4.interface XGigabitEthernet1/4/0/0interface XGigabitEthernet1/4/0/1interface XGigabitEthernet1/4/0/2interface XGigabitEthernet1/4/0/3interface XGigabitEthernet2/4/0/0interface XGigabitEthernet2/4/0/1interface XGigabitEthernet2/4/0/2interface XGigabitEthernet2/4/0/3……. userinterface con 0userinterface vty 0 4 authenticationmode aaaReturn二、S12800系列CSS堆疊配置組網需求在一個新建的數據中心網絡中,要求核心層具有較高的可靠性,并且希望網絡結構簡單,易于配置和管理。如圖所示,根據用戶需求,核心層SwitchA和SwitchB兩臺交換機采取堆疊組網,接口10GE1/0/1~10GE1/0/10GE2/0/1~10GE2/0/2加入堆疊端口?! 〔僮鞑襟E1. 連接堆疊線纜