電子信息類文獻翻譯(編輯修改稿)
2025-07-14 14:20 本頁面
【文章內容簡介】 environment. The purpose is to realize a remote call of the code by users through Inter for the performance analysis of the an application is very important to the concurrent design of MBS and for the utilization of distributive knowledge acquisition resources in collaborative work on modification and realization is described and the results are discussed.題目:MATLAB 網絡服務器及其有承磁系統的遠程協作設計的應用作者 :ZHAO AIPING 摘要:網絡的發展使要它適應新的環境,一些數學著作構造了一種 MATLAB 網絡服務器的環境能通過因特網直接的瀏覽 MATLAB 的計算過程。其安裝和使用方法將作出介紹。在 MATLAB 的平臺之上建立的一個代碼,處理承磁系統 (MBS) 附帶對 5 個自如的旋轉體的模型分析，并包括了一對在工作環境中被稱作是基本的沖力。其目的是讓用戶通過因特網為該系統的分析執行實現一個遠程的呼叫。這種方法對于 MBS 的協同設計和在合作領域中所需知識資源的利用是非常重要的。完善和實現以上功能的工作將會被涉及而且結果也會被討論。TITLE :NEURAL NETWORK MODELING FOR DYNAMIC PULSED GTAW PROCESS WITH WIRE FILLER BASED ON MATLAB 5 / 9AUTHOR Zhao Dongbin ABSTRACT:Doublesided weld pool shapes were determined by multiple welding parameters and wire feed parameters during pulsed GTAW with wire filler. Aiming at such a system with multiple inputs and outputs,an effective modeling method,consisting of the impulse signal design,model structure and parameter identification and verification,was developed based on MATLAB softwave. Then,dynamic neural work models,TDNNM(To pside dynamic neural nerwork model)and BHDNNM(Backside width and to pside height dynamic neural work model),were established to predict doublesided shape parameters of the weld characteristic relationship of the welding process was simulated and analyzed with the models.題目:基于 MATLAB 驅動脈沖 GTAW 處理程序的中樞網絡模型作者: Zhao Dongbin摘要:雙邊的焊圈形狀是由在驅動脈沖 GTAW 程序處理過程中多重焊接參數和充線參數決定的。瞄準擁有如此多樣輸入和輸出的系統，一個有效的基于MATLAB 軟件的建模方法, 由脈沖信號所組成，樣板的結構及叁數的確認和檢驗，得到長足的發展。接下來，驅動中樞網絡模型， TDNNM(單邊驅動中樞網絡模型) 和 BHDNNM( 背部寬度和高級單邊驅動中樞網絡模型 ), 被建立以預測焊圈的雙邊參變量。我們將對焊接過程的特性關系進行仿真和分析。TITLE : SIMULATION DESIGN FOR ALL OPTICAL NETWORKSAUTHOR:TangXiaodongABSTRACT:For specification,design,simulation and optimization of alloptical munication works,it is essential to develop aprototype of powerful OCAD(optical puter aided design) software tool. In this paper,it is concluded two kinds of methods to design OCAD for alloptical work:frequency domain analysis(FDA) and temporal domain analysis(TDA). Based on the SHAONET(Shanghai alloptical work) munication testbed,some initial OCAD design works are presented as examples,which prove to be great useful and efficient for designing and analyzing the performance of alloptical work.6 / 9題目:全光網的仿真設計作者:TangXiaodong摘要:為了實現所有光學通信網的規格，設計，仿真和優化，發展強大的 OCAD(計電子算機輔助設計) 軟件工具是至關重要的。在這篇文章中，為所有光網設計 OCAD 總結了兩種方
語文相關推薦
鄂ICP備17016276號-1