廣域網協議的封裝(編輯修改稿)
2025-06-10 08:26 本頁面
【文章內容簡介】 0。Queueing strategy: FIFO Output queue 0/40, 0 drops。 Input queue 0/75, 0 drops5 minutes input rate 14 bits/sec, 0 packets/sec5 minutes output rate 36 bits/sec, 0 packets/sec 403 packets input, 8866 bytes, 0 no buffer Received 246 broadcasts, 0 runts, 0 giants 15 input errors, 0 CRC, 15 frame, 0 overrun, 0 abort 1011 packets output, 29156 bytes, 0 underruns 0 output errors, 0 collisions, 59 interface resets 1 carrier transitions V35 DCE cable DCD=upDSR=upDTR=upRTS=upCTS=up R FrameRelay封裝RouterA(config)interface serial 1/2 //進行serial 1/2RouterA(configif)encapsulation framerelay//將接口協議封裝為幀中繼RouterA(configif)endRouterAshow interfaceserial 1/2 //查看接口的封裝協議 serial 1/2 is UP, line protocol is UPHardware is PQ2 SCC HDLC CONTROLLER serialInterface address is: MTU 1500 bytes, BW 2000 KbitEncapsulation protocol is FRAME RELAY, loopback not set//封裝協議Keepalive interval is 10 sec , setCarrier delay is 2 secRXload is 1 ,Txload is 1LMI enq sent1, LMI status recvd 0, LMI update recvd 0, DTE LMI upLMI enq recvd 0, LMI status sent0, LMI update sent
規章制度相關推薦
鄂ICP備17016276號-1