地磚花崗巖地面施工方案(編輯修改稿)
2025-05-25 06:23 本頁面
【文章內容簡介】 ter appropriate trial paving,lift up the a layer of dry cement to the dry, rigid closegrained cement mortar,and wet it once by the watering can, or water a layer of cement paste for mud bonding, then put the plate back at the position.再次安放時，板材四角要同時下落，放穩后用橡皮錘敲擊板面使其平整并與結合層能緊密年粘接牢固，板材表面與地面標高控制線吻合便完成一塊板材鋪貼，再依次鋪貼下一塊。When placed again, four corners of the plank should be dropped at the same time. After layed down steadily ,use a rubber hammer to strike it to make it flat and bonded firmlywith the bined course .The plank paving is done when the plank surface is coincided with the elevation of the ground control, then pave the next one . 鋪貼時要隨時找平找直，做到四角平整，縱橫縫隙對齊。When paving ,be sure that it is flat and straight. Make sure the four corners flat, and vertical and horizontal crack aligned. 三、質量要求Quality requirements大理石，花崗石Marble, granite item（1）面層與下一層應結合牢固無空鼓。Surface course should be bined firmly with the next one , without any gaps. （2）四角平整，縱橫縫隙對齊、無色差。Four corners flat, vertical and horizontal crack aligned, colorless difference. General item（1）大理石，花崗石面層的表面應潔凈，平整，無磨痕，且應圖案清晰，色澤一致，接縫均勻，周邊順直，鑲嵌正確，板塊無裂、掉角、缺棱等缺陷。The surface of Marble and granite should be clean,flat, no grinding mark, and clear pattern , consistent color, juncture uniform, straight surrounding, right Mosaic, plates without broken corners, no crack defects such as lack of edges.（2）踢腳線表面潔凈，高度一致，結合牢固，出墻厚度一致。The surface o
公司管理相關推薦
鄂ICP備17016276號-1