【文章內容簡介】
ESC 鍵退出引導設備選擇界面 6.按 ESC 鍵 ,敲 Enter鍵保存退出 步驟 3. Windows 2020 Text Mode Setup 文本模式安裝 Text Mode Setup 文本模式安裝 1. 把 Windows 2020 安裝光盤放入光驅,并從光盤引導。 2. 在屏幕的底部出現信息: Press F6 if you need to install a third party SCSI or RAID driver 時,按F6鍵。 這個動作將會停止硬件的自動檢測,并且允許您指定第三方硬件的驅動程序(如: PERC)。 3. 按完 F6,后,安裝程序會繼續加載模塊。這是正常的。過一會兒后,您將會看到以下信息: Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adaptor. 4. 按 S 鍵加載指定設備驅動程序。 5. 插入硬盤控制卡驅動軟盤并按 Enter,在設備列表里會有一項服務器所配置的硬盤控制