【文章內容簡介】
circuit to generate sine vibration, to obtain the necessary frequency. But can also Synthesis technology to obtain the necessary 9 rate. Frequency of use of technology into the signal generator, often referred to as synthetic signal generator. 3 The implementation methods of signal generator The realization of the function signal generator method usually have the following kinds: (1) the ponents with division: it is usually function generator single function generator and frequency is not high, its work is not very stable, not easy debugging. (2) can be made by the transistor, the opamp IC etc, more universal device is made with special function signal generator IC produce. Early function signal generator IC, such as L8038, BA205, XR2207/2209 etc, the functions of them less, precision, frequency cap 300kHz, unable to produce only higher frequency of signal, adjust the way also not enough flexibility, frequency and occupies emptiespared to cannot independent regulation, both affecting each other. (3) use monolithic integrated chip function generator: can produce various waveform, achieve the high frequency, and easy to debug. In view of this, the American beauty developed a new generation letter ICMAX038 function signal generator, it overes the (2) chip shortings, can achieve higher technical index, is the chip deficits. MAX038 frequency and high accuracy, good, therefore it is called a highfrequency precision function signal generator IC. In PLL, vco, frequency synthesizer, pulse width omdulatros etc circuit design, selection of devices are MAX038. Author: , Nationality: British Source: : / / / download / file2020 1 關于傳統信號發生器的簡介 (譯文 1)摘要 在 21 世紀的今天,信號發生器獲得了廣泛的應用和快速的發展信號發生器作為電子技術領域中最基本的電子儀器,廣泛應用于航空航天測控、通信系統、電子對抗、電子測量、科研等各個領域中。它能 滿足測試系統的多種要求,成為了系統綜合測試中不可缺少的組成部分。而且,隨著科技進步,信號發生器作為普遍的實驗信號源,在當今的電子實驗設計中起到了舉足輕重的作用。 1 簡介 信號發生器是一種最悠久的測量儀器,早在 20 年代電子設備剛出現時它就產生了。隨著通信和雷達技術的發展, 40年代出現了主要用于測試各種接收機的標準信號發生器,使信號發生器 從定性分析的測試儀器發展成定量分析的測量儀器。同時還出現了可用 測量脈沖電路或用作脈沖調制器的脈沖信號發生器。由于早期的信號發生器機械結構比較復雜,功率比較大,電路比較簡單,因 此發展速度比較慢。直到 1964 年才出現第一臺全晶體管的信號發生器。 自 60 年代以來信號發生器有了迅速的發展,出現了函數發生器,這個時期的信號發生器多采用模擬電子技術,由分立元件