【文章內容簡介】 發驗證系統技術方案（以下簡稱“方案”），是指設計滿足附件要求的總體技術方案，所需要的解決方案。該解決方案包括全部設計方案資料及關鍵電路驗證技術資料。
”Technical documentations” shall mean all the necessary documents to design the Solution and all the verification documents that Party B will use in designing the Solution.
技術資料，指研發解決方案所必需的資料，包含乙方在設計方案的過程中，所使用的全部有關驗證技術資料。
“Ramp。D” shall mean research and development.
“Ramp。D”，是指研究和開發。
”T/R”shall mean transmit and receive.
“T/R”，是指發射和接收。
”Soc”shall mean system on chip.
“SOC”,是指系統級芯片。
”ASIC”shall mean application specific integrated circuit.
”ASIC”,專用集成電路。
Article 2 Contents amp。 scopes of contract
第二條 合同內容和范圍
The requirements of the contract Solution合同技術方案要求
Technical Content技術內容:
(1)Design technical proposal。
設計技術方案；
(2)Key circuits verification。
驗證關鍵電路；
(3)Detailed technical requirements see technique attachment.
詳細技術要求見技術協議附件。
Technical Method and Strategy技術方法和路線:
(1)Should adopt SOC and ASIC technology。
采用SOC和ASIC技術；
(2) Should adopt the smart T/R system to verify the key circuits.
采用智能收發組件系統對關鍵電路進行實驗驗證。
The obligations of both parties 雙方義務
Party B shall submit the Ramp。D plan to Party A within two months after this contract es into effect.
乙方應在本合同生效后2個月內向甲方提交研究開發計劃。
Party B shall acplish the Solution design work according to the following schedule： 乙方應按下列進度完成方案設計工作：
(1)Phase one第一階段：
1) Initialization phase: select foundary, obtain design documents, analyze process files, establish puter system, rent and purchase EDA software, primary municate design thought of verification circuits and general Solution。
啟動階段：晶圓廠的選定、設計文件的獲得、工藝文件的分析、計算機系統的建立、EDA軟件的租用及購買、驗證電路與整體方案設計思路的初步溝通；
2)Design phase: module division of chip, principle design, puter simulation, layout design。 設計階段：芯片的模塊劃分、原理設計、計算機仿真、版圖設計；
3)Test phase: primary test and consecutive test.
測試階段：初測及繼續測試。
(2)Phase two: Alter the Solution according to the first phase results, and start second run.
第二階段：根據第一階段測試結果對方案進行修改，同時配合總體設計進行修改。
the both parties’ confirmation and on the request of Party A, Party B shall provide technical guidance and training to the personnel designated by Party A or provide the technical service related in the fulfillment Solution after the Solution is qualified by the verification circuits.
雙方確定，乙方應在合同方案的關鍵電路驗證合格后，根據甲方的請求，為甲方指定的人員提供技術指導和培訓，或提供與完成方案相關的技術服務。
With the confirmation of the both parties, within the validity of the Contract, Party A shall
as Party A’s project contact personas Party B’s project contact person. If any changes of the contact person occur, one party shall inform the other party based on written materials in due time. If one party fails to promptly inform the other party, it shall be held responsible for any influence or damage caused by the untimely notification during the performance of the Contract.
雙方確定，在本合同有效期內，甲方指定為甲方項目聯系人，乙方指定 為乙方項目聯系人，一方變更項目聯系人的，應當及時以書面形式通知另一方。未及時通知并影響本合同履行或造成損失的，應承擔相應的責任。
Delivery交付
Party B shall deliver the contract Solution to party A in accordance with the contents as specified in item of the contract.
，將合同方案技術資料交付甲方。
Assessment amp。 Acceptance合同方案的驗收
Confirmed by the both parties, Party A shall adopt the signed standards and methods to examine and accept the contract Solution by Party B.
雙方確定，按所簽訂的驗收標準對乙方完成的合同方案技術進行驗收。
To ensure that the contract Solution supplied by party B is correct， reliable and advanced， Party A,B shall jointly perform the assessment and acceptance of the technical Solution and core circuit in accordance with the provisions of items of the contract and technique attachment. if the technical Solution are qualified, both parties shall jointly sign a certificate of acceptance in two copies，one for each party.
為了保證乙方提供合同方案的正確性、可靠性和先進性，由甲乙雙方技術人員一起，，雙方代表要簽署驗收合格證書一式兩份，雙方各執一份為憑。
If the Solution cannot meet the requirements of the contract, both parties shall hold friendly discussions to analyze the reasons and take measures to correct any defect and prepare for the second assessment and acceptance of the contract Solution. If the Solution are still not qualified after the second assessment and acceptance and the responsibility lies in Party B ,Party B shall be responsible for all the losses thus caused, Party A shall have the right to terminate the contract and raise a claim against Party B according to Article 6； if the responsibility lies in Party A, both parties shall mutually discuss the further implementations of the contract.
如果考核驗收達不到本合同的規定要求，則雙方要友好協商，共同研究分析原因，采取措施，消除缺陷，進行第二次的考核和驗收。若經過第二次考核仍不合格，如屬乙方責任，則乙方應承擔由此而造成一切損失，甲方有權終止合同并按第6條的規定由甲方向乙方索賠，如屬甲方責任，則雙方應共同協商本合同的進一步執行問題。
Contract technical Solution results and related intellectual property ownership
合同技術方案研發成果及相關知識產權的歸屬
Confirmed by the both parties, the technical Solution results and related intellectual property right generated from the Contract shall be settled by the following methods.
雙方確定，因履行本合同所產生的研究開發成果及其相關知識產權權利歸屬，按以下式處理：
Party A has the right to apply for the patents. The use and the relevant allocation of benefits .
甲方享有申請專利的權利。專利權取得后的使用和有關利益分配方式如下：專利權為甲方所有，利益歸甲方所有。
The profit caused from the use and transfer of the ownership of patent right shall be dealt by the followi