t接線片沖壓模具設計(完整版)
【正文】 沖孔、落料同時進行的復合模。 我不會忘記這難忘的幾個月的時間。這對我來說是十分有重要學習環節。 最后，我要向?qū)忛喌母魑焕蠋煴硎靖兄x，謝謝你們能在百忙之中抽時間對本文進行評議。在我的學業和論文的研究工作中無不傾注著老師們辛勤的汗水和心血。這段旅程看似荊棘密布，實則蘊藏著無盡的寶藏。故，重新選取開式雙柱可傾式壓力機 J2310. 結 論 2021 年 5 月，我開始了 制作 我的畢業 設計 ，時至今日，論文基本完成。一般適合中、小批量生產，或各部分對精度要求不高的沖壓件生產。 關鍵字：復合模 設計 沖壓 4 Abstract Stamping process is through the use of conventional or special stamping equipment, the driving force, so that sheet in the mold directly affected by the deformation force and deformation, and thus obtain a certain shape, size and performance of the product parts production technology. Sheet metal, tooling and equipment are the three elements of stamping process. The use of the punching die sets Compound Die Blanking flip. First of all parts for process analysis, and development of technology programs, to determine the type of mold. Nesting materials through the utilization of the calculation, the calculation of punching force (including the discharge, and pusher force), the size of convex and concave edge calculation mode, as well as the determination of center of pressure to choose a suitable press. And then began to mold the structure of options, including mold, mold base, guide post, guide sets the standard parts, such as choice, followed by the design of nonstandard parts, such as punch, die, discharge, etc., in order to map parts diagram, assembly drawing lay a good foundation. Is through the front of the final design and data assembly drawing, part drawings, and then to check on the press to identify the use. Through this design, to understand the basic principles of press molding, sta
研究報告相關推薦
鄂ICP備17016276號-1