【正文】 ance amp。At the arrival of equipment, the Equipment Section of Manufacturing Department shall coordinate with the suppliers to make installation and missioning. After successful missioning, the suppliers are required to provide installation amp。If it is found of any failures, the operators shall stop the machine immediately and notice the equipment repairman to handle. In case of any accidents, the operators shall protect the site and report the case immediately to the workshop leaders and supervisory departments. The operators shall not dispose the accidents without obtaining approval. 操作者應了解設備的結構、性能，精心維護和保養設備，做到：The operators shall understand the equipment structure and performance, and maintain the equipment carefully. ——設備安全、防護裝置齊全，線路、管道完整、工件、工具放置整齊；The equipment safety amp。The operation instructions shall be formulated under the organization of the Equipment Section of Manufacturing Department. The operator shall observe the operation instructions and keep the equipment in good maintenance and repair.b. 必須對操作工進行知識和技能的培訓，經考核合格持證上崗。維修結束后，使用部門進行驗收，驗收合格后，針對故障在《設備履歷卡》上作記錄。 Scrapping 封存Cocooning根據相關部門提出封存申請，并填寫封存報廢申請，經制造部設備部門確認總經理辦公室批準后，由設備管理員在履歷卡上記錄。The equipment for critical and special process shall have an availability rate at 98%, while other equipment over 95%. 設備完好率計算方法：按月統計/以小時計算(設備完好率=設備月度計劃工作時間設備計劃外停機時間)/（設備月度計劃工作時間）100%。The Equipment Section of Manufacturing Department is responsible for numbering and labeling the equipment with nameplates. The critical and special process equipment must be clearly identified with labels.5 相關文件Specific Documents 《生產設備管理制度》 AICQ/WI090401“Production Equipment Management Regulations” AICQ/WI090401 《設備操作規程》 AICQ/WI090502“Equipment Operation Regulations” AICQ/WI0904026 記錄表單Records AICQ/QR090401A 《設備日常點檢卡》 AICQ/QR090401A “Equipment Routine Spotcheck Card” AICQ/QR090402A 《設備履歷卡》 AICQ/QR090402A “Equipment History Card” AICQ/QR090403A 《設備驗收記錄》 AICQ/QR090403A “Equipment Inspection amp。 Scrapping. The equipment can be cocooned subject to the confirmation of the Equipment Section of Manufacturing Department and approval of General Manager. The equipment administrator shall make records in the Equipment History Sheet. 報廢Scrapping 由制造部設備部門根據設備使用年限及其狀況和使用價值進行分析，填寫報廢申請，經總經理辦公室核準后進行報廢。 Repaira. 設備維修人員每年制定《設備年