單片機外文翻譯----at89c51單片機控制的恒溫水域溫控系統-單片機(完整版)
【正文】 iness of processing capacity punching equipment, punching equipment to the processing capacity as well as equipment based on the work table to consider the standard form of mold, practicality and versatility will be higher. In the threedimensional mold standard parts library has been established under the premise of the establishment of standards moldbase much to the convenience and quick. First of all, to enter the Pro / ASSMBLY equipped) mode, with the establishment of similar munities standard parts, the specific path for the operation: ASSMBLY (ponents) Family Tab (Family Table additem (additional items)) Component (ponent), and then choose to change to take place in the assembly of parts or ponents as the assembly of the project group table, and in the assembly do not need to change family (such as fasteners) you do not need to select. instances in the assembly of the assembly according to the agreed relationship between the automatically generated . other 5 aircraft such as the bending modulus, tensile modulus planes. Taking full account of this, pressing equipment and typical performance parameters under the premise of stamping parts, you can use the same solution to create a standard mold base. 3 Conclusion At present, some colleges and universities as a result of provincial funding in the strained devices, laboratory equipment, more backward, in chemistry and chemical engineering laboratories still use a contact thermometer to control water temperature. In order to overe the factors that a lot of inconvenience to the original based on the old thermostat has been designed transformation of waters. Proved by the use of the design， to meet the current chemistry, chemical engineering and research needs of the experimental results. 6 AT89C51 單片機控制的恒溫水域溫控系統 針對化工早期接點溫度計恒溫水域控溫存在的缺點，本文介紹了一種基于AT89C51 單片機為主控制器，結合 AD590J 集成溫度傳感器等組成的恒溫水域溫控系統。該電流轉換為電壓信號，通過模數轉換 ADC080 AT89C51 單片機實現溫度的監測和轉換。而單結晶體管的振蕩頻率受比例放 大器輸出電壓控制， AT89C51 單片機通過溫度設定值與溫度采樣值比較后的差值，經比較放大后產生隨溫度變化的電壓值來調解可控硅的導通角，從而實現對加熱功率的調節，滿足了恒溫水域的恒溫要求。其中設定子程序完成溫度的設定功能。 族表功能使三維模具標準件庫及標準模架庫的建立和使用成為很方便的事情。各企業可以根據模具設計需要建立自己的三維模具標準件庫。 結束語 目前，部分省屬高校由于設備經費較緊張、實驗設備較落后，化學化工實驗室仍使用著接點溫度計控制恒溫水域。其它的如彎曲模架、拉伸模架。類屬模型未在族表中被包含的項目在每個實例中會根據設計意圖自動生成，族表的另一個優點是不論創建一個新表還是修改一個已有的表，都可以向表中添加項目。 3)從一個零件文件生成系列變化，不必重新創建和生成每個零件。 軟件設計 軟件部分主要包括初始化、設定子程序、恒溫處理子程序、顯示子程序。 每一個設定7 按鍵除與 8255 的 IO 口相連外，還通過一個與門與 AT89C51 的定時器 T0 相連，以便當按鍵按下后立即向 AT89C51 申請中斷，查詢 8255 口狀態，同時進行相應的功能控制。 溫度采樣電路 溫度采樣電路采用了 AD590 電流型溫度敏感型器件其穩定度和線性度均較好。 temperature: ℃ 。 化學、化工實驗及其研究對恒溫水域的性能及精度要求很高，而目前市場上面對化學 、化工實驗及研究的恒溫水域系統價格很高。其中電阻 R 采用低溫度系數計量電阻，溫度系數為 10 l0_6／℃。 驅動電路 當 8255 相應 IO口輸出高電平時，驅
法律信息相關推薦
鄂ICP備17016276號-1