【正文】
兩類 ? 高溫硫化型,即 HTV型,為高分子量的固體橡膠 ,成型硫化的加工工藝和普通橡膠相似。 ? 1945美國 Dow Corning公司 研究的商品硅橡膠 SR73和 SR74問世,但質量差,至 1948年 J. E. Nyde等人得到高質量的聚合物將其取代。 ? 1951年又開發成功 苯基硅橡膠 。 ? 根據硅橡膠的側基不同主要有: 二甲基硅橡膠、甲基乙烯基硅橡膠、甲基苯基乙烯基硅橡膠、三氟丙基甲基乙烯基硅橡膠、腈硅橡膠 第十節 硅橡膠 第十節 硅橡膠 二甲基硅橡膠( MQ) ? 二甲基硅橡膠簡稱甲基硅橡膠,是硅橡膠中最老的品種; ? 能在- 60~ 250℃ 范圍內保持良好彈性,但其硫化活性低,工藝性能差,厚壁制品在二段硫化時易發泡,高溫壓縮變形大等; ? 目前除少量用于織物涂復外,已被甲基乙烯基硅橡膠所取代。 4: Surface 第十節 硅橡膠 特殊的表面性能和 生理惰性 ? 硅橡膠的 表面能比大多數有機材料低 ,它具有低吸濕性, 長期浸于水中其吸水率僅 1%左右,物理機械性能不下降,防霉性能良好 ;此外,它的許多材料不黏,可起隔離作用 。C ? Can be tailored to meet your fuel connector requirements for fuel resistance and swelling characteristics. ? Our product is made of silicone rubber, fiberglass textiles as its reinforcing material, and wound wires element or etched foil element. They are constructed using silicone rubber lamination technology and are available in a variety of configurations including: drum heaters, tapes, and blankets of many sizes with and without pressure sensitive adhesives. The silicone rubber heaters are characterized by their resistance to temperature extremes, moisture, weathering, radiation, fungus, and chemical attack, plus its high dielectric strength, flexibility, and cost effectiveness, and various shapes, holes, cutouts, profiled watt densities, and multiple voltages. The close even spacing of the wires or etched foil elements ensures a uniform heat distribution over the entire working area. The maximum continuous operating temperature for a silicone rubber heater mat is 250176。 ? (8) Watt Density: Max 10 W/cm2。 ? ◆ Drums and other vessels and viscosity control and asphalt storage。 硅橡膠的分類與品種 ? 電線、電纜型 ? 主要采用 MVQ,選用電絕緣性能良好的氣相白炭黑為補強劑,具有良好的壓出工藝性能。 硅橡膠的分類與品種 ? 海綿硅橡膠 ? 在 MVQ中加入亞硝基化合物、偶氮和重氮化合物等有機發泡劑,可制得發孔均勻的海綿。 硅橡膠的分類與品種 ? 熱收縮型 ? MVQ中加入具有一定熔融溫度或軟化