水利水電專業外文翻譯--混凝土重力壩基礎流體力學行為分析-橋梁設計(存儲版)
【正文】 meters, and thus a constant spacing of 5m was assumed in the putations. Values of aho in the range of 300–1000μm were used to determine the theoretical relationships of km=f (z), where z is the depth, and pare with field measurements. Measured permeability values in the two boreholes are relatively high at depths between 100 and 200m, probably denoting the presence of a sheared zone or a zone of more jointed rock. The measured rock permeabilities decrease steadily with an increase in depth, however, and their values correspond well with the theoretical trend of rock mass permeability estimated with the model. Typical hydraulic apertures of 400–500μm and joint stiffness following a hyperbolic relationship with NIK =10V mc and mcV = hoa seem to agree well with observed field behavior for these crystalline rock masses. jointed rock mass permeability relationship with depth. Although real Hydromechanical behavior of jointed rock masses is site specific and depends on geologic factors, which need to be taken into account, the proposed approach provides a framework to estimate rock mass permeability during design stages where information is not yet available. 。(b)hydraulic. This paper presents behavior representative of cycles of reservoir operation in the last 20 years collected from monitored data of Albigna Dam, Switzerland, and also describes the results of a series of numerical analyses carried out to assess the hydromechanical behavior of its foundations. Comparisons are made between results of numerical modeling and the actual behavior monitored in the field. Based on these parisons, a series of conclusions are drawn regarding basic porepressure buildup mechanisms in jointed rock masses with implications that may be considered in other engineering projects, where the hydromechanical behavior of jointed rock should be considered. Such projects include pressure tunnels, hazardous waste disposal, and other situations dependent on geologic containment controlled by flow behavior along rock discontinuities. Hydromechanical behavior of natural joints A brief summary of the stateoftheart of mechanical and hydraulic behavior of individual rock joints is presented here. A more detailed description of rock joint Hydromechanical behavior can be found in Alvarez(1997)and Alvarez et al.(1995)and in investigations in laboratory and numerical model simulations carried out by Raven and Gale (1985), Gentier (1987),Esaki et al.(1992),and others. The mechanical behav
畢業設計相關推薦
鄂ICP備17016276號-1