某家用電器公司0905設備管理控制程序-設備管理-免費閱讀
【正文】 Calculation of availability rate: on monthly/hourly basis (availability rate = monthly scheduled operating hours – unscheduled shutdown hours) / (monthly scheduled operating hours) x 100%. 由制造部設備部門負責設備編號，并在設備上附設備銘牌進行標識，對于關鍵和特殊過程設備必須進行明確標 識。 The department that is to cocoon or scrap equipment shall submit its application and fill the Application Form for Equipment Cocooning amp。 In case the equipment is found to fail during daily operation, the operating department shall issue a Job Bill and submit it to the maintenance personnel. At receipt of the Job Bill, the maintenance personnel shall assign proper repairman to make repairs. After pleting the repair, the operating department shall make an inspection. If the repair proves acceptable, the troubles will be recorded in Equipment History Sheet. 維修保養 Maintenance amp。 To improve knowledge and skills, the operators must be provided with necessary training. Only those holding qualification certificates are allowed to work on relevant posts. c. 做好年度維修、保養計劃，按計劃做好維修保養工作。 protection device must be plete。 missioning report, while the Equipment Section of Manufacturing Department is required to fill in the “Equipment Acceptance Records” and anize the Engineering Department, Manufacturing Department, Quality Department and operating units to carry out inspection and acceptance. The above departments are required to make their signatures on Handover Bill. 驗收合格后備件送倉庫保存，技術資料由制造部設備部門分類歸檔。 repair, and equipment management. 制造部設備部門負責組織工程技術部，制造部工藝部門和質量部進行設備驗收，并對新設備和維修過的設備進行設備能力調查。 This is applicable to the management of AICQ production equipment. 3 職責 Responsibility 制造部工藝科負責設備采購計劃的編制，制造部設備科參與 設備的選型。 The Manufacture Department shall determine the type, specification, quantity and standard of newly purchased equipment by considering the equipment production capability, technical performance, precision, reliability and maintainability in a prehensive way in accordance with the actual requirements of product quality characteristics. Application for equipment purchase shall be formulated and submitted to the GMO for approval. 設備到貨后，由制造部設備部門配合供應商安裝、調試。 The equipment operators shall hold qualification certificates and strictly observe the operation regulations. 操作工如發現故障應立即停機，通知設備維修人員處理。 Before operating the equipment, the operators shall inspect the equipment ponents and confirm they are in normal conditions. 機修人員應定期進行潤滑保養。 Maintenance Planning by considering the equipment operation, process stability as revealed in the process control drawing, and the manufacturers’ proposals. According to the workloads and difficulties, the maintenance is classified into four levels, . Routine Maintenance, 1st Level Maintenance (minor repair), 2nd Level Maintenance (
公司管理相關推薦
鄂ICP備17016276號-1